Author Topic: Convex scraper (Read 4353 times)

maitus · « **on:** March 03, 2020, 07:35:26 pm »

How to cut the teeth to convex scrapers so that the teeth will match?

dylanholderman · « **Reply #1 on:** March 03, 2020, 09:31:58 pm »

make one side first transfer the spacing over to the second one

maitus · « **Reply #2 on:** March 04, 2020, 12:49:11 am »

Logical.... thank You

JNystrom · « **Reply #3 on:** March 04, 2020, 06:08:56 am »

Or just use a toothed plane blade and grind to shape. Super quick to sharpen. And actually stays sharp too. I use kunz no.112

maitus · « **Reply #4 on:** March 04, 2020, 12:04:06 pm »

I'v never seen toothed plane blade.... especially convex blade

...Any picture?

JNystrom · « **Reply #5 on:** March 05, 2020, 02:46:16 am »

Like this. Just a toothed plane blade that i ground to shape.

Primitive Archer