« previous next »
Pages: [1]

Author Topic: Recurve Osage  (Read 3054 times)

0 Members and 1 Guest are viewing this topic.

Offline neuse

  • Member
  • Posts: 469
Recurve Osage
« on: October 18, 2019, 07:10:54 pm »
So, I am doing something I know nothing about nor do I have any experience with this.

I have a 59" Osage Self Bow, tip to tip, that I am making.
I recurved 7" of the tips. I think I need to get a protractor to measure the radius.

Tillering seems to be pretty straight forward with design, almost easy, unless I am doing something wrong.
Are there any cautions  for tillering a  recurve?

What about the tips, can I narrow them at the ends?

Mid limbs have some set to them, should I try to take some of this out?

Thanks,
Byron Neuse

Logged

Offline Deerhunter21

  • Member
  • Posts: 2,261
  • What do you despise? By this are you truly known.
Re: Recurve Osage
« Reply #1 on: October 18, 2019, 08:30:32 pm »
Are they static recurves?
Logged
Life before death. Strength before weakness. Journey before destination.

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: Recurve Osage
« Reply #2 on: October 18, 2019, 09:15:59 pm »
You have nearly 1/4 of the bows length as recurves. How long is the non-working handle area? In any case it doesn't leave much for working limbs. No wonder your bow is taking set.  Will you post pics of your bow so we can make better suggestions?
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline sleek

  • Member
  • Posts: 6,764
Re: Recurve Osage
« Reply #3 on: October 19, 2019, 05:56:43 am »
If there is mid limb set you should remove wood where set hasn't occurred yet. Evenly distributed set is the best way to go, because that means the bow is evenly stressed. You didnt mention how far its pulled so far  and to what draw length. Also, how wide is the bow? Pics also help.
Logged
Tread softly and carry a bent stick.

Dont seek your happiness through the approval of others

Offline neuse

  • Member
  • Posts: 469
Re: Recurve Osage
« Reply #4 on: October 19, 2019, 10:22:27 am »
I have some pics I took, having a difficult time getting them posted.
Technology is great and frustrating.
Logged

Offline neuse

  • Member
  • Posts: 469
Re: Recurve Osage
« Reply #5 on: October 20, 2019, 07:03:41 am »
Help please.

I have some pictures on my desktop.
I cannot seem to post from my PC.
Do I need a photo hosting account to post from?
Logged

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: Recurve Osage
« Reply #6 on: October 20, 2019, 11:25:56 am »
It makes posting pics easier.  Imgur seems to be the preferred site. That's what others and myself use.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline SLIMBOB

  • Member
  • Posts: 3,759
  • Deplorable Slim
Re: Recurve Osage
« Reply #7 on: October 20, 2019, 12:04:56 pm »
At that length it will take some set. Assuming some things here. 14 inches recurved, 8 or 9 inches in a static handle, 28 inch draw on a 59 inch bow. With good tiller set is inevitable. Very doable bow, just too short to avoid the set. Bendy handle changes that equation some.
Logged
Liberty, In God We Trust, E Pluribus Unum.  Distinctly American Values.

Offline neuse

  • Member
  • Posts: 469
Re: Recurve Osage
« Reply #8 on: October 21, 2019, 06:53:41 pm »
test pic
Logged

Offline neuse

  • Member
  • Posts: 469
Re: Recurve Osage
« Reply #9 on: October 21, 2019, 06:58:16 pm »
Thank you to my wife for helping me with this.
Logged
Pages: [1]
« previous next »