« previous next »
Pages: [1]

Author Topic: Red elm hollow limb design. 30#@26"  (Read 2016 times)

0 Members and 1 Guest are viewing this topic.

Offline Josh B

  • Member
  • Posts: 3,741
Red elm hollow limb design. 30#@26"
« on: October 13, 2019, 01:21:20 pm »
This is a piece of red elm that I harvested in Illinois 7 or 8 yrs ago.  The sapwood got damaged in transit so I had to chase several rings to clean it up.  I ended up with a Heartwood back before I was successful.  This is my first attempt at an hld.  It has a natural reflex coming off the handle in both directions, but not enough that I tried to correct it.  After it was shooting, my daughter put it through her rigorous inspection and determined that it was nearly acceptable.  She went on to say that she was quite confident that it would be fully acceptable if I would only fancy it up a bit.  So...I glued on my last copperhead pattern cloth strip and finished it up with spar urethane.  It's 60" NTN 30#@26".  There is no one here to do a full draw pic so maybe later on that
Logged

Offline Josh B

  • Member
  • Posts: 3,741
Re: Red elm hollow limb design. 30#@26"
« Reply #1 on: October 13, 2019, 01:22:37 pm »
Couple more pics
Logged

Offline Deerhunter21

  • Member
  • Posts: 2,261
  • What do you despise? By this are you truly known.
Re: Red elm hollow limb design. 30#@26"
« Reply #2 on: October 13, 2019, 01:52:25 pm »
thats pretty! FD pics soon?
Logged
Life before death. Strength before weakness. Journey before destination.

Offline bassman

  • Member
  • Posts: 962
Re: Red elm hollow limb design. 30#@26"
« Reply #3 on: October 13, 2019, 08:01:21 pm »
Nice.
Logged

Offline redhillwoods

  • Member
  • Posts: 123
Re: Red elm hollow limb design. 30#@26"
« Reply #4 on: October 13, 2019, 08:20:52 pm »
It looks beautiful. I look forward to the full draw pics,
Logged

Offline DLH

  • Member
  • Posts: 400
Re: Red elm hollow limb design. 30#@26"
« Reply #5 on: October 13, 2019, 11:27:49 pm »
I really like this bow those hollow limbs look wild. You have been on a rampage with bows lately. What do you feel the benefit of hollow limbs are? Did you use a gouge to hollow the limbs?

Daniel
Logged

Offline Hawkdancer

  • Member
  • Posts: 5,040
Re: Red elm hollow limb design. 30#@26"
« Reply #6 on: October 13, 2019, 11:45:26 pm »
Well, let's see here - 30#@26" or so!  Hmmm!  Your daughter ought to be able to draw that - or worst case, take an fd of you drawing it!  Really even worse, we might have to draft a volunteer!  I would also like to know how to get the hollow limb done correctly.  Got to be some magic involved! :BB >:D (lol). I haven't advanced that far yet!
Hawkdancer
Logged
Life is far too serious to be taken that way!
Jerry

Offline PEARL DRUMS

  • Member
  • Posts: 14,079
  • }}}--CK-->
Re: Red elm hollow limb design. 30#@26"
« Reply #7 on: October 14, 2019, 11:39:45 am »
Man, somebody has been doing some serious catch up in the bow shop! Got all the gun projects cleaned up?
Logged
Only when the last tree has died and the last river has been poisoned and the last fish has been caught will we realize we cannot eat money.

Offline Josh B

  • Member
  • Posts: 3,741
Re: Red elm hollow limb design. 30#@26"
« Reply #8 on: October 14, 2019, 11:00:16 pm »
Thanks fellas.  I got sidetracked yesterday and forgot to get a full draw pic before I hit the road.  Daniel I mostly used gouges, goose neck scraper and a 60 grit sander belt wrapped around a dowel for most of it.  I really don't know that much about the design, this being my first attempt at it.  Simson is the one that could better discuss it's merits.  I tried it because I was afraid I was going to lose too much width and get a lot of set with the high crown and intended low draw weight.  I didn't do any heat treatment at all and it's kept the original 1" of deflex it started with.  That really surprised me with red elm.
Pearly I got most of the high priority gun projects done.  Still plenty of work left on my bench though.  I had to get some bows done because the kids had outgrown their old bows and 4h shooting sports starts up again in a couple weeks.
Thanks fellas I'll try to get more pics up next weekend.
Logged

Offline Parnell

  • Member
  • Posts: 5,556
Re: Red elm hollow limb design. 30#@26"
« Reply #9 on: October 15, 2019, 08:06:07 am »
Looks very nice, Josh.  Fun to see you post up. 

I've done two of these types of bows from Osage staves.  The second just needs a little more scraping.  I'm not convinced, myself, that there is much advantage when it's being "carved out" from a stave.  I wonder if the more sapling types of bows that have some natural curved contour on both the back and the belly flatten out more at draw and give the advantage?  Dunno...

But, looks good.  Wishing you well.

Parnell
Logged
1’—>1’

Offline PaSteve

  • Member
  • Posts: 816
Re: Red elm hollow limb design. 30#@26"
« Reply #10 on: October 15, 2019, 04:21:35 pm »
Really nice looking bow. I like the way you shaped the grip. Looks very comfortable. Great job.
Logged
"It seems so much more obvious with bows than with other matters, that we are the guardians of the prize we seek." Dean Torges
Pages: [1]
« previous next »