Author Topic: Cut Old Osage Trees.......Or Young  (Read 2367 times)

0 Members and 1 Guest are viewing this topic.

Offline Boudreaux

  • Member
  • Posts: 29
Cut Old Osage Trees.......Or Young
« on: April 15, 2008, 04:24:30 pm »
When cutting osage what do you cut any why? Is there anyway to avoid alot of pin knot?

Offline cowboy

  • Member
  • Posts: 7,035
  • Paul Wolfe. Springtown, TX
Re: Cut Old Osage Trees.......Or Young
« Reply #1 on: April 15, 2008, 04:29:16 pm »
Little pin knots aren't that much of a problem - big knots are. I've had better luck on the bigger trees - being cleaner, but sure it just varies from tree to tree. If I get a chance to cut some free trees, I'll take any of em that look like they have bows :).
When you come upon a track or trail you do not know, follow it to the point of knowing.

Offline tom sawyer

  • Member
  • Posts: 1,466
Re: Cut Old Osage Trees.......Or Young
« Reply #2 on: April 15, 2008, 04:59:32 pm »
I prefer about a 10" tree over a larger one.  The bigger ones seem to slow their growth in later years, and I've run into more problems with rot and wind shakes in the big ones too.  My ideal, is a nice 8-10" diameter tree growing off a cut stump in a hedge row.  These grow up fast because they have an established root system feeding them, and they grow with few limbs because they are partially shaded by stuff growing around them.  More often than not, these things are clean and have nice growth rings.  By the way, around here a healthy 8"-diameter tree is around 15 years old and has growth rings around 1/8" or better.

The other place I have found good trees, is in the woods where a tree has a lot of shade and has to grow up to find light.  The ones out in the open, tend to grow really twisty and bushy.
« Last Edit: April 15, 2008, 05:40:18 pm by tom sawyer »
Lennie
Hannibal, MO