Author Topic: Another one goes bang  (Read 1358 times)

0 Members and 1 Guest are viewing this topic.

Offline Del the cat

  • Member
  • Posts: 8,322
    • Derek Hutchison Native Wood Self Bows
Another one goes bang
« on: August 07, 2019, 06:24:13 am »
Funny how all the minor issues always seem to be at the same point and lead to failure  ::) .
TBF I was pushing it hard for a few reasons.
https://bowyersdiary.blogspot.com/2019/08/damn-working-it-too-hard.html

This also sort of ties in with the "when to pull to full draw weight" thread.
It was going to be a heavy weight flight warbow for shooting big 1/2" and 3/8" "military" and "standard" arrows. Yew with an 1/4 sawn Ash back, it was just some timber I happened to have and wasn't carefully selected primo stuff... more of an experiment.
I was exercising at 100#, target 120# . I could see the middle was working hard, but just wanted to see the draw length at 110#  ::)
Del
Health warning, these posts may contain traces of nut.

Offline Hamish

  • Member
  • Posts: 1,549
Re: Another one goes bang
« Reply #1 on: August 07, 2019, 07:30:43 am »
A shame. The twisted grain backing strikes again.

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,609
Re: Another one goes bang
« Reply #2 on: August 07, 2019, 11:40:20 am »
I bet it was exciting.  (--)  Hope you weren't hurt.
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline bjrogg

  • Member
  • Posts: 10,987
  • Cedar Pond
Re: Another one goes bang
« Reply #3 on: August 07, 2019, 12:34:53 pm »
I'm guessing it won't be the last Del. You like to push em. It sounds like a combo of things working to foil your war bow. You'll no doubt be victorious in your next one.
Bjrogg
PS went to your link to see if you had a video. I remember the one where your feet rise up in the air after the bow breaks on the tree.lol that was a good one.
Bjrogg
« Last Edit: August 07, 2019, 12:50:12 pm by bjrogg »
A hot cup of coffee and a beautiful sunrise

Offline Hawkdancer

  • Member
  • Posts: 5,039
Re: Another one goes bang
« Reply #4 on: August 07, 2019, 01:49:10 pm »
Opps!  I guess where a pulley and rope come in handy!  Maybe they don't go "Boom" at 45-50#?  (--) >:D!
Hawkdancer
Life is far too serious to be taken that way!
Jerry

Offline Woodely

  • Member
  • Posts: 381
Re: Another one goes bang
« Reply #5 on: August 08, 2019, 12:39:50 am »
100# what they feeding you over there......
"Doing bad work is an exercise in futility, but honestly making mistakes is trying your best."

bownarra

  • Guest
Re: Another one goes bang
« Reply #6 on: August 08, 2019, 01:13:47 am »
Shame but dodgy grain on backings is a deal breaker :)