« previous next »
Pages: [1]

Author Topic: Tight rings on Osage  (Read 1785 times)

0 Members and 1 Guest are viewing this topic.

Offline ccase39

  • Member
  • Posts: 177
  • Loving to learn
Tight rings on Osage
« on: July 31, 2019, 02:32:32 am »
I have a stave of Osage with very thin rings. 1/16 inch or so. Is it worth chasing rings or should I just back it with something like sinew or bamboo?
Logged
Reading
The Traditional Boyers Bible Vol 1
The Bent Stick

Working on bow #7

Offline sleek

  • Member
  • Posts: 6,764
Re: Tight rings on Osage
« Reply #1 on: July 31, 2019, 02:38:17 am »
Chase em if you got em. Sometime you cant hardly even see them, in those cases, ring violation is not critical, treat it like yew, and just make the back flat with no sharp gouges dips from tool markings. Essentially decrown it.
Logged
Tread softly and carry a bent stick.

Dont seek your happiness through the approval of others

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: Tight rings on Osage
« Reply #2 on: July 31, 2019, 02:57:29 am »
I love thin ringed osage. I think it makes a snappier bow. If you are concerned about ring violation back the bow with rawhide.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

bownarra

  • Guest
Re: Tight rings on Osage
« Reply #3 on: July 31, 2019, 03:04:36 am »
The thickness of the rings doesn't matter if you do a good job. Think about it you are trying to remove the ring above the one you want for your back. Regardless of how thick they are you should never touch the ring you want.
The way to do it is chase the ring above the one you want then simply use very gentle pressure to get to the next ring. Just go slow and be gentle on that last ring.
The osage I'm working on now has rings less than 1/32nd thick.
Logged

Offline ccase39

  • Member
  • Posts: 177
  • Loving to learn
Re: Tight rings on Osage
« Reply #4 on: July 31, 2019, 04:44:38 am »
Thanks so much guys!
Logged
Reading
The Traditional Boyers Bible Vol 1
The Bent Stick

Working on bow #7

Offline SLIMBOB

  • Member
  • Posts: 3,759
  • Deplorable Slim
Re: Tight rings on Osage
« Reply #5 on: July 31, 2019, 09:42:03 am »
Love love love tight ringed Osage.  When the early wood ratio is good, you cant beat it!  No backer in my opinion.
Logged
Liberty, In God We Trust, E Pluribus Unum.  Distinctly American Values.
Pages: [1]
« previous next »