« previous next »
Pages: [1]

Author Topic: red oak wood lift  (Read 4294 times)

0 Members and 1 Guest are viewing this topic.

Offline huntertrapper

  • Member
  • Posts: 1,708
red oak wood lift
« on: April 12, 2008, 04:17:55 pm »
i made a red oark board bow a while ago and the wood at a certain point is starting to lift. small not big sheets. like little pieces at the same place on both limbs. i put super glue on them they. hold but a few more "popped" out. could i "patch" the area with some inner bark or using a patch that will be good enough to dry in just a few days? is inner bark good at all for backing the thing? thanks fellas.
Logged
Modern Day Tramp

Offline Kegan

  • Member
  • Posts: 2,676
Re: red oak wood lift
« Reply #1 on: April 12, 2008, 07:48:42 pm »
Put some Titebond II or III, or some felxible epoxy in there, and wrap the limb with thread. SHouldn't come loose after that.
Logged

Offline huntertrapper

  • Member
  • Posts: 1,708
Re: red oak wood lift
« Reply #2 on: April 12, 2008, 09:24:04 pm »
hey thanks man. appreciate it.
Logged
Modern Day Tramp

Offline david w.

  • Member
  • Posts: 1,823
Re: red oak wood lift
« Reply #3 on: April 12, 2008, 09:33:41 pm »
do what kegan said.

i dont know about inner bark though. as long as its tough it should work

was your bow that you made backed?  i back my board bows with linen.
Logged
These pretzels are making me thirsty.

if it dont go fast...chrome it - El Destructo

Offline huntertrapper

  • Member
  • Posts: 1,708
Re: red oak wood lift
« Reply #4 on: April 12, 2008, 10:02:18 pm »
no actually i didnt. and i saw you do that, ill have to do it. seems easy. what kind of linen and how is it done? :)
Logged
Modern Day Tramp

Offline david w.

  • Member
  • Posts: 1,823
Re: red oak wood lift
« Reply #5 on: April 12, 2008, 10:06:58 pm »
go to a fabrics store and ask for 100% linen sheetes or sometimes goodwill will have it.

squeeze a good healthy stream of glue on the back of you r boww and put on your strip of linen. make sure it is saturated in glue. then trim the edges and shellac it.

silk also workd but i have always heard linen is better.

in ttb1 it says linen is better than sinew for brute protection but linen wont add sip it just protects it.
Logged
These pretzels are making me thirsty.

if it dont go fast...chrome it - El Destructo

Offline david w.

  • Member
  • Posts: 1,823
Re: red oak wood lift
« Reply #6 on: April 12, 2008, 10:12:12 pm »
i trim the linen close with siccors then do the rest with a file

here a pic of my last linen job

the handle section and limbs the on eof the limbs is a bad picture

[attachment deleted by admin]
Logged
These pretzels are making me thirsty.

if it dont go fast...chrome it - El Destructo

Offline Kegan

  • Member
  • Posts: 2,676
Re: red oak wood lift
« Reply #7 on: April 12, 2008, 10:27:55 pm »
David, did you pull the linen tight first, or just lay it on?
Logged

Offline El Destructo

  • Member
  • Posts: 8,078
  • Longhaired Crippled Hippie Biker And Proud Of It!!
    • Desert Sportz Primitive Archery
Re: red oak wood lift
« Reply #8 on: April 12, 2008, 10:29:26 pm »
Sounds to me like you have Grain Peel going on there....your Best Bet would be a Linen or Silk Backing....and be done with it
Logged
As a species we're fundamentally insane. Put more than two of us in a room, we pick sides and start dreaming up ways to kill one another.Why do you think we invented politics and religion.
Think HEALTHCARE Is Expensive Now,Wait Till It's FREE
Do Or Do Not,There Is No TRY
2024...We Will Overcome

Offline david w.

  • Member
  • Posts: 1,823
Re: red oak wood lift
« Reply #9 on: April 12, 2008, 10:29:58 pm »
i lay it on and make sure there is no air bubbles. so its got to be a ltittle tight then. i put it on and smooth it out towards the nocks so it doesnt bunch up.
just as long as there is no gaps or air bubbles
Logged
These pretzels are making me thirsty.

if it dont go fast...chrome it - El Destructo

Offline huntertrapper

  • Member
  • Posts: 1,708
Re: red oak wood lift
« Reply #10 on: April 12, 2008, 10:44:51 pm »
yeah, i think i will. ill do what kegan said till turkey then after turkey i do the backing. turkey is nexy week and i need to shoot and finish some arrows, along with school and others things it will hold with just a patch. but, thanks david and it looks good too. on your board bow. nice job man.
Logged
Modern Day Tramp

Offline Coo-wah-chobee

  • Member
  • Posts: 2,503
Re: red oak wood lift
« Reply #11 on: April 12, 2008, 10:53:56 pm »
Quote from: david w. on April 12, 2008, 10:06:58 pm
go to a fabrics store and ask for 100% linen sheetes or sometimes goodwill will have it.

squeeze a good healthy stream of glue on the back of you r boww and put on your strip of linen. make sure it is saturated in glue. then trim the edges and shellac it.

silk also workd but i have always heard linen is better.

in ttb1 it says linen is better than sinew for brute protection but linen wont add sip it just protects it.
                                                                                                                                                                                                                 David......Linen is not better than sinew fer brute protection. I believe they were talkin' about flax fibers. Linen is made from flax but its not as the same as fax fibers..........bob
Logged
Pages: [1]
« previous next »