« previous next »
Pages: [1]

Author Topic: point size  (Read 4097 times)

0 Members and 1 Guest are viewing this topic.

Offline S.C. hunter

  • Member
  • Posts: 139
  • does a possum have enough brains to tan his hide ?
point size
« on: June 16, 2019, 03:53:34 pm »
Hey Everyone,
  I would like to get some opinions to what size points you think are best for hunting. Hunting Whitetails, and Hogs.  Size as far as Length, Width, also some favorite types that you think work best.
   Thanks,
    Steve
Logged

Offline paulc

  • Member
  • Posts: 657
Re: point size
« Reply #1 on: June 16, 2019, 05:40:41 pm »
Your state will have regs on minimum  width...

Paul
Logged

Offline aaron

  • Member
  • Posts: 1,037
Re: point size
« Reply #2 on: June 16, 2019, 05:52:45 pm »
Mine are near the minimum for WA state- 7/8 wide by 2 long including stem.
Logged
Ilwaco, Washington, USA
"Good wood makes great bows, but bad wood makes great bowyers"

Offline bjrogg

  • Member
  • Posts: 10,987
  • Cedar Pond
Re: point size
« Reply #3 on: June 16, 2019, 07:15:18 pm »
I like this shape. It's just over 7/8" wide
Bjrogg
PS the bigger one
Logged
A hot cup of coffee and a beautiful sunrise

Offline S.C. hunter

  • Member
  • Posts: 139
  • does a possum have enough brains to tan his hide ?
Re: point size
« Reply #4 on: June 16, 2019, 08:24:42 pm »
Paulc... Actually S.C. does not have any regulations on point size. I really just curious about what seems to work best for most People. Thanks for the reply :)
Aaron... I have just made 2 Obsidian points that are just about that size. how well do they penetrate at that size for you ? I know it has a lot to do with the pounds of the bow, I am shooting about 48 lbs. most of the time. Just wondering if I should go a little smaller... thanks
Bjrogg... I like that style point. Doesn't look like any unnecessary drag after the initial hole is made.  Thanks.
   Steve
Logged

Offline Tower

  • Member
  • Posts: 2,298
Re: point size
« Reply #5 on: June 17, 2019, 06:35:53 am »
I like a 2:1. Or a 3:1  7/8-1” wide.  My average is about 75 grains
Logged
He who sacrifices freedom for a security deserves neither one.  Benjamin Franklin!

Offline Tower

  • Member
  • Posts: 2,298
Re: point size
« Reply #6 on: June 17, 2019, 06:43:25 am »
Here is a pic of what the top point did for me.
Logged
He who sacrifices freedom for a security deserves neither one.  Benjamin Franklin!

Offline bjrogg

  • Member
  • Posts: 10,987
  • Cedar Pond
Re: point size
« Reply #7 on: June 17, 2019, 06:53:08 am »
Looks like a pretty nice buck Tower. So far mine has just penetrated the dirt. I screwed up on a perfect shot from my tree stand my second season. Still need to work more on shooting from tree. 0 for 2 from tree. 2 for 2 from the ground. Both of those where steel broad heads though. Wasn't the arrows fault on either of the from tree strikes.
Bjrogg
Logged
A hot cup of coffee and a beautiful sunrise

Offline mullet

  • Global Moderator
  • Member
  • Posts: 22,909
  • Eddie Parker
Re: point size
« Reply #8 on: June 19, 2019, 04:14:29 am »
7/8" wide and 1 1/2-2" long, triangle points for me.
Logged
Lakeland, Florida
 If you have to pull the trigger, is it really archery?

Offline JEB

  • Member
  • Posts: 1,735
Re: point size
« Reply #9 on: June 19, 2019, 05:49:53 am »
Tower posted photos of the points I like to use. Now if I could just get mine to look half that good.lol
Logged

Offline Hawkdancer

  • Member
  • Posts: 5,039
Re: point size
« Reply #10 on: June 19, 2019, 10:40:52 am »
Nice points, everyone!  We have a choice of steel or steel here in Colorado!  Tower, nice arrows!
Hawkdancer
Logged
Life is far too serious to be taken that way!
Jerry

Offline boerneaggie

  • Member
  • Posts: 8
Re: point size
« Reply #11 on: July 12, 2019, 08:26:01 am »
Nice Job! Congrats!
Logged
Pages: [1]
« previous next »