I recently finished this bow for a swap on another site. Its from a pair of billets i got from Wizardgoat some time back. I glued them together in deflex as i was going for a mild deflex reflex but i couldn't get the reflex to hold. It pulled out the first time at brace so i tillered it out to 24" then heated the reflex in again. The second time it pulled out before i had it back to 24" again. After that i gave up on the reflex and just kept on tillering out to 28".
It ended up being one of the smoothest drawing bows I've ever made and is snappier than i expected and has very little set from where it was before i reflexed it. Still not sure why i couldn't get any reflex to stay.
64" ttt - 47#@28"
URL=http://imgur.com/X4ZURA8]
[/URL
URL=http://imgur.com/x5Aa13Z]
[/URL
URL=http://imgur.com/oG2dIRJ]
[/URL
URL=http://imgur.com/owBjPb8]
[/URL
URL=http://imgur.com/l9RBaKe]
[/URL
URL=http://imgur.com/0tx3CkZ]
[/URL
URL=http://imgur.com/U1tgUAf]
[/URL