« previous next »
Pages: [1] 2 3

Author Topic: Maple Backed Yew R/D Molle  (Read 7763 times)

0 Members and 1 Guest are viewing this topic.

Offline DC

  • Member
  • Posts: 10,396
Maple Backed Yew R/D Molle
« on: March 27, 2019, 10:27:23 am »
This is the bow from the "New Project" thread. It's 60" TTT measured directly. Working limbs are 2" wide tapering 14" to 1 1/2". Yew billets spliced and deflexed about 8°. Total reflex 3 1/2". Levers are Yew spliced on with 3" "V" joints reinforced with Peruvian Walnut. Wraps on the limbs are due to a small popped splinter on the lower limb, upper is decorative. Tips are Peruvian Walnut. Handle is a leather wrap.
It's 38#@28". Shoots 10ggp@179fps(down 3fps from pre-finishing) and 8gpp@198fps(same as pre-finishing, strange). Big hooks make it a pain to brace but I had very little string alignment issues. Just one tiny heat twist. Sorry my pictures aren't up to Weylins, but you get what you pay for ;D
Logged

Offline DC

  • Member
  • Posts: 10,396
Re: Maple Backed Yew R/D Molle
« Reply #1 on: March 27, 2019, 10:29:00 am »
More
Logged

Offline DC

  • Member
  • Posts: 10,396
Re: Maple Backed Yew R/D Molle
« Reply #2 on: March 27, 2019, 10:30:06 am »
FD. I heard a little noise when I drew it to take this picture. Couldn't make it happen again.
Logged

Offline PatM

  • Member
  • Posts: 6,737
Re: Maple Backed Yew R/D Molle
« Reply #3 on: March 27, 2019, 11:19:10 am »
Maybe the CA flexing and cracking on the wraps?
Logged

Offline DC

  • Member
  • Posts: 10,396
Re: Maple Backed Yew R/D Molle
« Reply #4 on: March 27, 2019, 11:23:52 am »
I used hide glue, but I was wondering the same thing. I'll go shoot it for a while. See if I make a two piece ;D
Logged

Offline IrishJay

  • Member
  • Posts: 442
Re: Maple Backed Yew R/D Molle
« Reply #5 on: March 27, 2019, 11:36:26 am »
 :OK Very nice, well done.
Logged
"The best camouflage pattern is called, 'Sit down and be quiet!' Your grandpa hunted deer in a red plaid coat, think about that for a second." - Fred Bear

Offline DC

  • Member
  • Posts: 10,396
Re: Maple Backed Yew R/D Molle
« Reply #6 on: March 27, 2019, 11:57:58 am »
100 arrows, I gave up before it did. I seems to have a bit of negative tiller now. I'll have to back and fix that after a few hundred more shots. It shoots nice though.
Logged

Offline maitus

  • Member
  • Posts: 310
Re: Maple Backed Yew R/D Molle
« Reply #7 on: March 27, 2019, 12:21:17 pm »
Fantastic bow. Not simple design but my favorite. Looks like 3 lam bow.... beautiful! And.... it is fast :D !!!

 Im curious about brace height and width of the handle in point where the arrow is touching the handle, because i have similar bow to tiller. One inch shorter than Yours :).
« Last Edit: March 27, 2019, 12:36:40 pm by maitus »
Logged

Offline IrishJay

  • Member
  • Posts: 442
Re: Maple Backed Yew R/D Molle
« Reply #8 on: March 27, 2019, 12:40:54 pm »
If you're really worried about the noise it made you could always send it to me. I'll put a couple thousand arrows through it, maybe shoot a couple of deer, you know, for safety.  (-S
Logged
"The best camouflage pattern is called, 'Sit down and be quiet!' Your grandpa hunted deer in a red plaid coat, think about that for a second." - Fred Bear

Offline Dante_F

  • Member
  • Posts: 179
Re: Maple Backed Yew R/D Molle
« Reply #9 on: March 27, 2019, 12:54:07 pm »
i've always wondered about a recurved molle i wonder how it would word when reflexed?
Logged

Offline Woodely

  • Member
  • Posts: 381
Re: Maple Backed Yew R/D Molle
« Reply #10 on: March 27, 2019, 01:03:17 pm »
All in all she looks fabulous.  "FD. I heard a little noise when I drew it to take this picture. Couldn't make it happen again."   I have heard that dreaded tick noise a few times, and thought it was just the backing or glue somewhere. This is why I Inspect my bows with a magnifying glass from tip to tip, only takes a minute.  Shoot the bow 50-100 times check it re shoot it and recheck it re shoot it and recheck it.  After a while you will know every imperfection on that bow if you have any.  Sometimes a stress crack will be hidden behind the backing or somewhere like that.
Logged
"Doing bad work is an exercise in futility, but honestly making mistakes is trying your best."

Offline PatM

  • Member
  • Posts: 6,737
Re: Maple Backed Yew R/D Molle
« Reply #11 on: March 27, 2019, 01:07:27 pm »
Quote from: DELTA_WOLF on March 27, 2019, 12:54:07 pm
i've always wondered about a recurved molle i wonder how it would word when reflexed?

  You mean like a  Finno-Ugrian bow?  ;)
Logged

Offline DC

  • Member
  • Posts: 10,396
Re: Maple Backed Yew R/D Molle
« Reply #12 on: March 27, 2019, 01:18:58 pm »
Quote from: maitus on March 27, 2019, 12:21:17 pm
Fantastic bow. Not simple design but my favorite. Looks like 3 lam bow.... beautiful! And.... it is fast :D !!!

 Im curious about brace height and width of the handle in point where the arrow is touching the handle, because i have similar bow to tiller. One inch shorter than Yours :).
I never noticed how low the brace height was until I went out to shoot it after I took the pictures. It was about an inch low in the pictures. It's about 6.5" now. The handle is 1 1/8" wide at the arrow pass(could be less) but it's offset to make it more center shot. You can see it in the picture. Arrow pass is upper right. I stole this idea from Marc St Louis
Logged

Offline Deerhunter21

  • Member
  • Posts: 2,261
  • What do you despise? By this are you truly known.
Re: Maple Backed Yew R/D Molle
« Reply #13 on: March 27, 2019, 01:31:26 pm »
wait. what do you mean you heard a little noise when drawing?
Logged
Life before death. Strength before weakness. Journey before destination.

Offline maitus

  • Member
  • Posts: 310
Re: Maple Backed Yew R/D Molle
« Reply #14 on: March 27, 2019, 01:31:37 pm »
Quote from: DC on March 27, 2019, 01:18:58 pm

 Arrow pass is upper right. I stole this idea from Marc St Louis

Thank You, DC! And i will steal this idea from You :D ....
Logged
Pages: [1] 2 3
« previous next »