Hi, new here from Pennsylvania! Last January I cut about a 12" diameter osage to start my first selfbow. No board bows for me wanted to have the complete immersive experience. I was able to get about 35 staves from the tree put up and drying. I worked one stave down in particular and felt it was ready by April 2018.
So was born my first bow. 62" 50#@28", and only took about 3/4-1" of set. Since i have made a 62" r/d and a 49" recurve that is a load! Tweaked it a little so waiting a day to pull it again but it was 55#@24" with at least another inch of draw length. I will post photos of those as well.
Please provide criticism as you see fit because I am still learning and have a long way to go!