« previous next »
Pages: [1]

Author Topic: Plains Indians erc sinew backed bow design  (Read 1752 times)

0 Members and 1 Guest are viewing this topic.

Offline Jakesnyder

  • Member
  • Posts: 458
Plains Indians erc sinew backed bow design
« on: February 16, 2019, 09:10:12 am »
I know with eastern red cedar (juniper) works best sinew backed with wide thin limbs. I'm trying to find a good short bendy handle design for erc. Can you go 1.25in center out 2/3rds then tapered to 5/8ths at the tips? Gull wing style? Having made this design with osage I'm not sure if erc can handle it? Thanks for any help.
Logged

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: Plains Indians erc sinew backed bow design
« Reply #1 on: February 16, 2019, 09:22:08 am »
I'd start out a little wider. You can always reduce the width if necessary later.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline upstatenybowyer

  • Member
  • Posts: 2,700
Re: Plains Indians erc sinew backed bow design
« Reply #2 on: February 16, 2019, 06:04:18 pm »
How long?
Logged
"Even as the archer loves the arrow that flies, so too he loves the bow that remains constant in his hands."

Nigerian Proverb

Offline Jakesnyder

  • Member
  • Posts: 458
Re: Plains Indians erc sinew backed bow design
« Reply #3 on: February 17, 2019, 10:56:37 am »
55" ttt. I'm looking for a 24" draw at 50lbs
Logged

Offline upstatenybowyer

  • Member
  • Posts: 2,700
Re: Plains Indians erc sinew backed bow design
« Reply #4 on: February 17, 2019, 05:54:50 pm »
Wider for sure. I'd go close if not all the way to 2". You can go thinner in the grip area, just leave it thicker.  :)
Logged
"Even as the archer loves the arrow that flies, so too he loves the bow that remains constant in his hands."

Nigerian Proverb

Offline loefflerchuck

  • Member
  • Posts: 1,129
    • www.heartwoodbows.com
Re: Plains Indians erc sinew backed bow design
« Reply #5 on: February 18, 2019, 08:51:58 pm »
Juniper can go quite narrow with a thick sinew backing. I've tested the design of old Flathead and northern plains bows. 1/3 sinew the rest juniper. 1.25" wide a max at the handle tapering from there. Reflexed, 46" long 23.5" draw 58#. No problems. They are flawless staves though.
Logged
Pages: [1]
« previous next »