Author Topic: Coatings for snakeskin backs  (Read 1305 times)

0 Members and 1 Guest are viewing this topic.

Offline Taxus brevifolia

  • Member
  • Posts: 304
Coatings for snakeskin backs
« on: February 12, 2019, 09:16:13 am »
I gather some of you tru-oil them, and I'm interested to learn what other things people use.

Does anyone leave them bare with hide glue holding it on the back?

I'm thinking of dried only/untanned skins. I imagine the treatment for tanned skins would be different

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: Coatings for snakeskin backs
« Reply #1 on: February 12, 2019, 10:04:30 am »
I use Tru-Oil just like with all my bows. You can use wipe-on poly, spray pole or almost ant other bow finish. You do need to seal the skins, especially if you use hide glue.
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline PEARL DRUMS

  • Member
  • Posts: 14,079
  • }}}--CK-->
Re: Coatings for snakeskin backs
« Reply #2 on: February 12, 2019, 10:19:23 am »
I wipe a few coats of shellac on to smooth the skin sockets out and stick down any "pokeys", then spray with Helmsman.
Only when the last tree has died and the last river has been poisoned and the last fish has been caught will we realize we cannot eat money.

gutpile

  • Guest
Re: Coatings for snakeskin backs
« Reply #3 on: February 12, 2019, 10:46:15 am »
spar varathene in satin finish  about 3- 5 coats... gut

Offline bradsmith2010

  • Member
  • Posts: 5,187
Re: Coatings for snakeskin backs
« Reply #4 on: February 12, 2019, 12:41:14 pm »
what they say, its so beautiful with a nice finish

Offline Stoner

  • Member
  • Posts: 356
Re: Coatings for snakeskin backs
« Reply #5 on: February 13, 2019, 04:49:36 am »
Tru Oil or Minwax wipe on Poly. John

Offline Taxus brevifolia

  • Member
  • Posts: 304
Re: Coatings for snakeskin backs
« Reply #6 on: February 16, 2019, 05:51:21 am »
Thanks very much guys