« previous next »
Pages: [1]

Author Topic: Detached handle/ OXO kitchen knife  (Read 6371 times)

0 Members and 1 Guest are viewing this topic.

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Detached handle/ OXO kitchen knife
« on: January 24, 2019, 09:27:27 am »
I have an OXO kitchen knife that the handle came off. I don't think anything broke but there was a gooey substance inside the area where the blade was attached to the handle. The rubber handle has a metal tang molder inside where the blade attaches and the blade has a corresponding slot in the mounting tang. Any ideas on how to re-attach the handle and blade?
I can post pics if that will help.
 I have an email into the OXO company asking for help but I thought I'd ask here too.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline dylanholderman

  • Member
  • Posts: 787
Re: Detached handle/ OXO kitchen knife
« Reply #1 on: January 24, 2019, 10:15:39 am »
Pics would definitely help, sounds like the glue failed?
Logged

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: Detached handle/ OXO kitchen knife
« Reply #2 on: January 24, 2019, 11:29:50 am »






Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline dylanholderman

  • Member
  • Posts: 787
Re: Detached handle/ OXO kitchen knife
« Reply #3 on: January 24, 2019, 01:56:02 pm »
Ok looks more like a weld/solder joint failure, best thing to do if possible would be to get the piece still in the handle out and re solder it and then put it back together again.
A second option if that’s not possible is to put the blade back in and drill a couple 1/8” holes through he blade tang and remaining handle parts and pin them together, but I’m not sure that would do the comfort of the handle any favers.
Logged

Offline JW_Halverson

  • Member
  • Posts: 11,923
Re: Detached handle/ OXO kitchen knife
« Reply #4 on: January 24, 2019, 03:06:26 pm »
Maybe have someone weld on a tang and put proper scales on it?

Oxo uses fairly good steel, but they cheap out on another $0.18 for at least a half tanged knife.
Logged
Guns have triggers. Bicycles have wheels. Trees and bows have wooden limbs.

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: Detached handle/ OXO kitchen knife
« Reply #5 on: January 24, 2019, 04:22:14 pm »
Dylan, there is no visible broken weld, the tang in the rubber handle is molded in and fits in a slot in the blade tang. There was some brown gooey stuff in the handle and the blade tang and slot. I guessed it was knife makers resin but it doesn't seem like any way the handle can support the blade with just resin.
 John, that could be another option.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline osage outlaw

  • Member
  • Posts: 11,962
Re: Detached handle/ OXO kitchen knife
« Reply #6 on: January 24, 2019, 04:47:54 pm »
I would try to epoxy it back in place and drill a hole for a pin or two.  You could make the pins just a little shorter than the thickness of the handle so they wouldn't protrude and poke your hand.  If that doesn't hold up you could try JW's suggestion of a welded tang.  That might work if you can keep the heat from getting into the blade and ruining the temper. 
Logged
I started out with nothin' and I still got most of it left

Offline KHalverson

  • Member
  • Posts: 758
Re: Detached handle/ OXO kitchen knife
« Reply #7 on: January 24, 2019, 04:54:57 pm »
just my .02.
id clean the tang and handle really well .
rough up the tang and use brownells glass  or some premium 3000 psi  2 part epoxy to put it back together.

Kevin
Logged

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: Detached handle/ OXO kitchen knife
« Reply #8 on: January 24, 2019, 08:21:37 pm »
Thanks guys. I was thinking an epoxy or JB Weld. I've had the 2 halves soaking in hot water and Dawn. That has gotten lots of the goo out. I'll try alcohol or acetone to degrease and clean better.
I have an email into the company but haven't heard back. This sure looks like a weak handle/blade attachment for a well used kitchen knife.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline Mr. Woolery

  • Member
  • Posts: 110
Re: Detached handle/ OXO kitchen knife
« Reply #9 on: February 10, 2019, 10:48:08 pm »
Acetone, JB Weld. 

I'm not positive that's the best thing to do, but it is exactly what I would do.  The gap-filling potential of the JB Weld will make up for the potential run-out that would happen with a thinner epoxy. 

The construction is not very impressive, but the tool can be made about as good as it used to be, at least. 

-Patrick
Logged

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: Detached handle/ OXO kitchen knife
« Reply #10 on: February 11, 2019, 01:33:51 pm »
I used JB Weld and it seems to be holding just fine. We'll see.
 I sent an email to OXO Knives asking for repair suggestions. They sent me a new knife, not the same model but a new knife anyway.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline Bryce

  • Global Moderator
  • Member
  • Posts: 3,125
  • Pacific Ghost Longbows
Re: Detached handle/ OXO kitchen knife
« Reply #11 on: February 18, 2019, 09:03:22 am »
Drill and tap in a copper or brass rivet:)
Logged
Clatskanie, Oregon
Pages: [1]
« previous next »