« previous next »
Pages: [1]

Author Topic: measuring draw length  (Read 2120 times)

0 Members and 1 Guest are viewing this topic.

Offline redhillwoods

  • Member
  • Posts: 123
measuring draw length
« on: January 03, 2019, 07:05:04 pm »
Is drawlength measured from the belly side of the handle where it presses against the palm or from the back?
Logged

Offline Weylin

  • Member
  • Posts: 2,296
Re: measuring draw length
« Reply #1 on: January 03, 2019, 07:23:25 pm »
It's typically measured from the back of the bow to the inside of the arrow nock.
Logged

Online Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: measuring draw length
« Reply #2 on: January 03, 2019, 07:48:18 pm »
x2
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline Hawkdancer

  • Member
  • Posts: 5,040
Re: measuring draw length
« Reply #3 on: January 03, 2019, 11:27:42 pm »
Along with Weylin and Pat, your anchor point also plays a role.
Hawkdancer
Logged
Life is far too serious to be taken that way!
Jerry

Online Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: measuring draw length
« Reply #4 on: January 04, 2019, 07:38:39 am »
Say you had a 28" arrow with a broadhead on it. The arrow length is measured from the throat of the nock to behind the broadhead. If you pulled to a 28" draw you would cut your hand with the broadhead when you hit full draw if you measured to the belly. Always measure to the back of the bow.  ;)
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline bradsmith2010

  • Member
  • Posts: 5,187
Re: measuring draw length
« Reply #5 on: January 04, 2019, 12:20:49 pm »
from the back,,
Logged

Offline Badger

  • Member
  • Posts: 8,124
Re: measuring draw length
« Reply #6 on: January 04, 2019, 12:28:33 pm »
   Always to the back of the bow with a few exceptions. If you want an amo measurement you measure to the deepest part of the grip and add 1 3/4" this is also the method used when some kind of official testing is done.
Logged

Offline George Tsoukalas

  • Member
  • Posts: 9,425
    • Traditional and Primitive Archers
Re: measuring draw length
« Reply #7 on: January 05, 2019, 07:52:20 am »
Yes, I measure string to back. Jawge
Logged
Set Happens!
If you ain't breakin' you ain't makin!
Pages: [1]
« previous next »