« previous next »
Pages: [1] 2 3 4

Author Topic: Making a gas forge  (Read 26632 times)

0 Members and 1 Guest are viewing this topic.

Offline osage outlaw

  • Member
  • Posts: 11,962
Making a gas forge
« on: December 17, 2018, 04:24:44 pm »
This has been on my to-do list for a long time.  I finally started on it.  This old propane tank should make a decent forge.




I couldn't get the valve loose so I put a .44 magnum vent hole in the bottom to make sure it was empty.




Front and back openings cut, old paint removed, burner ports installed, and legs made from horse shoes.




Painted with high temp flat black.  It looks grey in the pictures.  I'm waiting on a few parts to be delivered before I build the burners. 




Logged
I started out with nothin' and I still got most of it left

Offline BowEd

  • Member
  • Posts: 9,390
  • BowEd
Re: Making a gas forge
« Reply #1 on: December 17, 2018, 04:35:49 pm »
Pretty darn neat Clint.
Logged
BowEd
You got to stand for something or you'll fall for anything.
Ed

Offline Danzn Bar

  • Member
  • Posts: 4,166
Re: Making a gas forge
« Reply #2 on: December 17, 2018, 04:41:17 pm »
Looking good Buddy
DBar
Logged
Integrity is doing the right thing when no one is looking

Offline DC

  • Member
  • Posts: 10,396
Re: Making a gas forge
« Reply #3 on: December 17, 2018, 05:04:29 pm »
Quote from: osage outlaw on December 17, 2018, 04:24:44 pm

I couldn't get the valve loose so I put a .44 magnum vent hole in the bottom to make sure it was empty.

I knew Elvis wasn't dead ;D ;D ;D
Logged

Offline Trapper Rob

  • Member
  • Posts: 3,719
Re: Making a gas forge
« Reply #4 on: December 17, 2018, 06:21:54 pm »
I have a tank to do the same thing.
Clint where are you getting your parts from?
Logged

Offline osage outlaw

  • Member
  • Posts: 11,962
Re: Making a gas forge
« Reply #5 on: December 17, 2018, 06:51:39 pm »
I got the supplies to insulate and line it from Wayne Coe.  He has a website.   The rest I've got from home depot and ebay.
Logged
I started out with nothin' and I still got most of it left

Offline sleek

  • Member
  • Posts: 6,764
Re: Making a gas forge
« Reply #6 on: December 17, 2018, 07:53:20 pm »
Can you show and tell about your burner set up?
Logged
Tread softly and carry a bent stick.

Dont seek your happiness through the approval of others

Offline osage outlaw

  • Member
  • Posts: 11,962
Re: Making a gas forge
« Reply #7 on: December 17, 2018, 08:02:00 pm »
I will once I get it assembled.
Logged
I started out with nothin' and I still got most of it left

Offline JW_Halverson

  • Member
  • Posts: 11,923
Re: Making a gas forge
« Reply #8 on: December 18, 2018, 01:08:45 pm »
Any mysterious stink juice in this one???   >:D
Logged
Guns have triggers. Bicycles have wheels. Trees and bows have wooden limbs.

Offline KHalverson

  • Member
  • Posts: 758
Re: Making a gas forge
« Reply #9 on: December 18, 2018, 02:03:41 pm »
nice.
how many inches of inswool  are you adding?
2 venture style burners should get you to welding heat no problem.
are you going to add a tool rest out front  for those long pieces?
Logged

Offline osage outlaw

  • Member
  • Posts: 11,962
Re: Making a gas forge
« Reply #10 on: December 18, 2018, 08:34:20 pm »
I'm using 2 layers of Inswool 1" thick.  I thought about a tool rest but I want to keep the overall length down so I can store it on a shelf.  I have plenty of fire brick to set up as a rest. 
Logged
I started out with nothin' and I still got most of it left

Offline bjrogg

  • Member
  • Posts: 11,016
  • Cedar Pond
Re: Making a gas forge
« Reply #11 on: December 19, 2018, 08:28:49 pm »
Looking good Clint. Those look like some pretty nice welds on those burner ports.
Bjrogg
Logged
A hot cup of coffee and a beautiful sunrise

Offline osage outlaw

  • Member
  • Posts: 11,962
Re: Making a gas forge
« Reply #12 on: December 20, 2018, 06:49:21 am »
I can't take credit for those welds BJ.  Our MIG welder is out for repairs so I had to get someone to TIG weld it for me.  I haven't learned how to TIG weld yet.

The last of the burner parts were delivered yesterday.  I'm waiting on a cold or rainy day to put it together.  The weather has been too nice for indoor projects. 
Logged
I started out with nothin' and I still got most of it left

Offline Hawkdancer

  • Member
  • Posts: 5,040
Re: Making a gas forge
« Reply #13 on: December 20, 2018, 10:43:37 am »
The .44 mag probably loosened up the valve a bit >:D (lol)!  A nifty looking improv!  You could show that off at MoJam! 
Hawkdancer
Logged
Life is far too serious to be taken that way!
Jerry

Offline TrevorM

  • Member
  • Posts: 205
Re: Making a gas forge
« Reply #14 on: December 20, 2018, 11:20:38 am »
Oh I like that, great idea! Hmm I have an old tank too, I might have to give that a go I've been wanting to try out forging.
Logged
Trevor
Pages: [1] 2 3 4
« previous next »