« previous next »
Pages: 1 2 3 [4] 5 6 7

Author Topic: Making a Snake (finished pics on pg 5)  (Read 20680 times)

0 Members and 1 Guest are viewing this topic.

Offline upstatenybowyer

  • Member
  • Posts: 2,700
Re: Making a Snake
« Reply #45 on: November 23, 2018, 06:27:24 pm »
No worries about that check after that.
Logged
"Even as the archer loves the arrow that flies, so too he loves the bow that remains constant in his hands."

Nigerian Proverb

Offline bjrogg

  • Member
  • Posts: 11,016
  • Cedar Pond
Re: Making a Snake
« Reply #46 on: November 23, 2018, 06:32:24 pm »
That'll hold that snake together Jeff. It'll shrink down and tighten up good when it dries to.
Bjrogg
Logged
A hot cup of coffee and a beautiful sunrise

Offline upstatenybowyer

  • Member
  • Posts: 2,700
Re: Making a Snake
« Reply #47 on: November 23, 2018, 06:33:38 pm »
Yes sir BJ! That's why I like using sinew for wraps like this.  :)

Finished up today's work with some elk antler overlays. I cut the wood and antler with a hacksaw and used a rasp and some 40 grit sandpaper glued to a flat little block to make the joint. Then I apply CA and use some inner tube to wrap the overlays on.
Logged
"Even as the archer loves the arrow that flies, so too he loves the bow that remains constant in his hands."

Nigerian Proverb

Offline upstatenybowyer

  • Member
  • Posts: 2,700
Re: Making a Snake
« Reply #48 on: November 23, 2018, 06:34:31 pm »
last pics for today...
Logged
"Even as the archer loves the arrow that flies, so too he loves the bow that remains constant in his hands."

Nigerian Proverb

Offline RandyN

  • Member
  • Posts: 138
Re: Making a Snake
« Reply #49 on: November 24, 2018, 11:41:44 am »
Nice to see your bow bending. I like how you fixed the side check. Good information that I can use on my future projects.
Logged

Offline upstatenybowyer

  • Member
  • Posts: 2,700
Re: Making a Snake
« Reply #50 on: November 24, 2018, 06:56:36 pm »
Randy, I'm glad you got some useful info from the build.  :) Anything I can give back to this amazing community is my pleasure.

Well, she's pretty much finished up. Just gonna take some time now to apply 8 or so coats of true oil and figure out how I want to do the handle. Thank you all for taking the time to check out the build. I'll be sure to post plenty of pics when she's all dressed up and ready for the dance.  :OK
Logged
"Even as the archer loves the arrow that flies, so too he loves the bow that remains constant in his hands."

Nigerian Proverb

Offline M2A

  • Member
  • Posts: 878
Re: Making a Snake
« Reply #51 on: November 24, 2018, 11:23:34 pm »
Great build along Upstate. Thanks for sharing. Looks real good so far, looking forward seeing it all finished up.
Mike
   
Logged

Offline hoosierf

  • Member
  • Posts: 492
Re: Making a Snake
« Reply #52 on: November 25, 2018, 04:24:39 am »
Great rings on that stave. This a very well done build along. Thanks as we all know it takes a lot of time to create these threads.
Logged

Offline George Tsoukalas

  • Member
  • Posts: 9,425
    • Traditional and Primitive Archers
Re: Making a Snake
« Reply #53 on: November 25, 2018, 06:46:52 am »
I was just wondering because I thought I saw a saber saw in one of your photos.  Jawge
Logged
Set Happens!
If you ain't breakin' you ain't makin!

Offline upstatenybowyer

  • Member
  • Posts: 2,700
Re: Making a Snake
« Reply #54 on: November 25, 2018, 10:57:16 am »
Man, I'm so glad you guys got something out of it.  :)

Jawge, I use the saber saw for cutting out the curves on the fades.  :OK
Logged
"Even as the archer loves the arrow that flies, so too he loves the bow that remains constant in his hands."

Nigerian Proverb

Offline BowEd

  • Member
  • Posts: 9,390
  • BowEd
Re: Making a Snake
« Reply #55 on: November 25, 2018, 11:10:02 am »
Good build-a-long Jeff.
Logged
BowEd
You got to stand for something or you'll fall for anything.
Ed

Offline bradsmith2010

  • Member
  • Posts: 5,187
Re: Making a Snake
« Reply #56 on: November 25, 2018, 11:24:16 am »
when can we shoot it,, (SH)
Logged

Offline George Tsoukalas

  • Member
  • Posts: 9,425
    • Traditional and Primitive Archers
Re: Making a Snake
« Reply #57 on: November 25, 2018, 12:41:18 pm »
Oh I see. Jawge
Logged
Set Happens!
If you ain't breakin' you ain't makin!

Offline DC

  • Member
  • Posts: 10,396
Re: Making a Snake
« Reply #58 on: November 25, 2018, 12:43:46 pm »
I've tried my first finger joint. I had epoxied a filler strip on one limb so I was afraid to boil it. As a result the fit wasn't good but I can't break it :D
I later tried boiling a couple of pieces of wood that had been epoxied together. I boiled it for about 10 minutes and it held strong so next one I will boil and clamp
Logged

Offline upstatenybowyer

  • Member
  • Posts: 2,700
Re: Making a Snake
« Reply #59 on: November 25, 2018, 07:16:33 pm »
Thanks Ed. This is the first one I've done where the bow made it all the way to completion!  :D

Brad, if you can make it up to the Rochester, NY area I'll send it home with ya! We got plenty of room...  (-S

Good deal DC. I think you'll find it's a great way to splice. Plenty of surface area in half the length!  8)
Logged
"Even as the archer loves the arrow that flies, so too he loves the bow that remains constant in his hands."

Nigerian Proverb
Pages: 1 2 3 [4] 5 6 7
« previous next »