« previous next »
Pages: [1] 2

Author Topic: My second bow post on here Tiller check and Stave/Tree ID help  (Read 3045 times)

0 Members and 1 Guest are viewing this topic.

Offline TolkienFan

  • Member
  • Posts: 70
My second bow post on here Tiller check and Stave/Tree ID help
« on: November 11, 2018, 11:49:35 am »
Hi all, 

I finally have had time to get back into working on my bows after a couple years.  I am working on a hickory that I have had as a stave for two years and really trying to take my time and do it right so that I can join the bow exchange soon!  I want to take a bit more off the tips, but want your guys expert advice? 

Also, I just found an incredibly straight young tree on a walk and dragged it home.  It looks absolutely perfect for a bow with no knots and no rot.  Can any of you help identify? I live in North Carolina if that helps.

Thanks!
Logged
“The Road goes ever on and on
Down from the door where it began.
Now far ahead the Road has gone,
And I must follow, if I can.”

Offline Badger

  • Member
  • Posts: 8,124
Re: My second bow post on here Tiller check and Stave/Tree ID help
« Reply #1 on: November 11, 2018, 12:04:29 pm »
   That tiller shape will shoot well as long as the bow can stand up to that much bend near the handle without taking too much set. As a rule you would need a little less bend near the handle and more bend in the mid and outer limbs.
Logged

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,609
Re: My second bow post on here Tiller check and Stave/Tree ID help
« Reply #2 on: November 11, 2018, 03:13:06 pm »
Do you have any idea what the leaves look like?
Where in NC. I'm in Brevard, southwest of Asheville and north of Greenville, SC.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline bjrogg

  • Member
  • Posts: 10,987
  • Cedar Pond
Re: My second bow post on here Tiller check and Stave/Tree ID help
« Reply #3 on: November 11, 2018, 03:36:38 pm »
I agree with Badger. Can't help with the tree ID
Bjrogg
Logged
A hot cup of coffee and a beautiful sunrise

Offline TolkienFan

  • Member
  • Posts: 70
Re: My second bow post on here Tiller check and Stave/Tree ID help
« Reply #4 on: November 11, 2018, 07:11:12 pm »
Yeah it was hinging at first right past the handle before I got to brace height. It’s still above draw weight so I hope I can get the outer parts bending better.  I’ll try and post once I have done some more work on the tiller. I spent today building my first shave horse.

No, unfortunately, I didn’t see any of the leaves.

Pat B, I am in Durham.
Logged
“The Road goes ever on and on
Down from the door where it began.
Now far ahead the Road has gone,
And I must follow, if I can.”

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,609
Re: My second bow post on here Tiller check and Stave/Tree ID help
« Reply #5 on: November 11, 2018, 08:03:22 pm »
The end grain looks like sassafras or sumac but the bark isn't sassafras. Does the wood have a specific smell?
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline ThreeSons

  • Member
  • Posts: 23
Re: My second bow post on here Tiller check and Stave/Tree ID help
« Reply #6 on: November 11, 2018, 08:34:07 pm »
Is sycamore is a possibility? Molted bark there make me think that's what it is.
Logged

Offline TolkienFan

  • Member
  • Posts: 70
Re: My second bow post on here Tiller check and Stave/Tree ID help
« Reply #7 on: November 11, 2018, 08:35:42 pm »
It doesn’t have a smell. It’s pretty hard and dense. I rough shaped it down a bit and seemed almost as hard as the hickory but has a darker color.
Logged
“The Road goes ever on and on
Down from the door where it began.
Now far ahead the Road has gone,
And I must follow, if I can.”

Offline George Tsoukalas

  • Member
  • Posts: 9,425
    • Traditional and Primitive Archers
Re: My second bow post on here Tiller check and Stave/Tree ID help
« Reply #8 on: November 11, 2018, 09:39:21 pm »
I might be inclined to give mid limb on on both limbs a few scrapes. Don't pull it too far until you fix the tiller.
« Last Edit: November 12, 2018, 07:46:47 am by George Tsoukalas »
Logged
Set Happens!
If you ain't breakin' you ain't makin!

Offline BowEd

  • Member
  • Posts: 9,390
  • BowEd
Re: My second bow post on here Tiller check and Stave/Tree ID help
« Reply #9 on: November 12, 2018, 05:14:01 am »
Have to agree with George here.It would be nice to see top profile look on your bow also.
Logged
BowEd
You got to stand for something or you'll fall for anything.
Ed

Offline Hawkdancer

  • Member
  • Posts: 5,039
Re: My second bow post on here Tiller check and Stave/Tree ID help
« Reply #10 on: November 12, 2018, 10:30:00 am »
You might be able get get someone at the university botany dept. to id that log for you with a good sample of the bark. 
Logged
Life is far too serious to be taken that way!
Jerry

Offline TolkienFan

  • Member
  • Posts: 70
Re: My second bow post on here Tiller check and Stave/Tree ID help
« Reply #11 on: November 12, 2018, 11:51:19 am »
I look on some websites and it looks a bit like Red Maple now.  There is a lot of maple around here.  Here is a photo that looks fairly similar. Anyone agree? 
Logged
“The Road goes ever on and on
Down from the door where it began.
Now far ahead the Road has gone,
And I must follow, if I can.”

Offline Hrothgar

  • Member
  • Posts: 1,477
Re: My second bow post on here Tiller check and Stave/Tree ID help
« Reply #12 on: November 12, 2018, 06:36:29 pm »
Pretty similar.
Logged
" To be, or not to be"...decisions, decisions, decisions.

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,609
Re: My second bow post on here Tiller check and Stave/Tree ID help
« Reply #13 on: November 12, 2018, 06:51:48 pm »
Red maple has really white wood and the bark just doesn't look it.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline Mounter

  • Member
  • Posts: 198
Re: My second bow post on here Tiller check and Stave/Tree ID help
« Reply #14 on: November 12, 2018, 08:29:00 pm »
Mystery wood.... see if it’ll bend !
Logged
Pages: [1] 2
« previous next »