« previous next »
Pages: [1]

Author Topic: Bone knife  (Read 6835 times)

0 Members and 1 Guest are viewing this topic.

Offline Lucasade

  • Member
  • Posts: 335
Bone knife
« on: October 08, 2018, 01:33:45 pm »
Been away for quite a while - life got in the way big time. I'm now trying to finish off some projects before starting anything new. This is a knife I made for use in our camper van to go with the set of birch spoons I already made. The blade is cow bone, handle is laburnum cut in my village fixed with bone pins and birch pitch, finished with mix of beeswax and tallow. The entire process done only with hand tools from end to end. It's my first ever knife so any pointers for the future would be very welcome.







Logged

Offline Hawkdancer

  • Member
  • Posts: 5,040
Re: Bone knife
« Reply #1 on: October 08, 2018, 11:38:59 pm »
Wow!!  That is very nice!  Gives me ideas for the elk leg my granddaughter found!  Very good craftsmanship!
Hawkdancer
Logged
Life is far too serious to be taken that way!
Jerry

Offline Pappy

  • Global Moderator
  • Member
  • Posts: 32,198
  • if you have to ask you wouldn't understand ,Tenn.
Re: Bone knife
« Reply #2 on: October 09, 2018, 04:58:19 am »
Very nice work, that should work just fine. :)
 Pappy
Logged
Clarksville,Tennessee
TwinOaks Bowhunters
Life is Good

Offline Lucasade

  • Member
  • Posts: 335
Re: Bone knife
« Reply #3 on: October 09, 2018, 11:02:09 pm »
Thank you - used it yesterday for the first time. I think I may re-profile the cutting edge to a more gentle taper for easier cutting.
Logged

Offline stuckinthemud

  • Member
  • Posts: 2,355
    • avenue woodcarving
Re: Bone knife
« Reply #4 on: October 10, 2018, 02:25:10 pm »
I'm just learning to work bone, didn't know it was strong enough for a knife blade, thanks for posting this.
Logged

Offline DC

  • Member
  • Posts: 10,396
Re: Bone knife
« Reply #5 on: October 10, 2018, 04:46:53 pm »
How well does it hold an edge? I'm thinking you couldn't carve wood with it much but would it last for butchering meat?
Logged

Offline Lucasade

  • Member
  • Posts: 335
Re: Bone knife
« Reply #6 on: October 10, 2018, 10:55:48 pm »
So far it's cut lettuce and cucumber just fine  )P( I understand a bone blade can cut anything up to but not including wood, and it's much easier to process than metal! Experiments will continue...
Logged

Offline Zuma

  • Member
  • Posts: 4,324
Re: Bone knife
« Reply #7 on: October 12, 2018, 11:17:44 am »
Very nice looking and cool 8) right down to the pins.
Zuma
Logged
If you are a good detective the past is at your feet. The future belongs to Faith.

Offline Ryan Jacob

  • Member
  • Posts: 427
Re: Bone knife
« Reply #8 on: October 13, 2018, 07:12:41 am »
Lucasade
That’s inspiring. Any tips for cutting out bone?
Logged

Offline Lucasade

  • Member
  • Posts: 335
Re: Bone knife
« Reply #9 on: October 13, 2018, 07:35:20 am »
Thanks guys. Ryan, I use a hacksaw for rough cuts then a metalwork blade on a fretsaw for the more detailed cuts. If you go slow it doesn't throw up too much dust but I usually wear a dust mask anyway. Others who know much more will correct me but I've found gently simmering a freshly stripped bone for about 5 minutes removes enough oils that it doesn't gum up the tools without removing so much it becomes brittle.
Logged

Offline selfbow joe

  • Member
  • Posts: 996
  • 1-812-344-1590
Re: Bone knife
« Reply #10 on: October 14, 2018, 08:59:45 am »
Cool looking knife
Logged

Offline silverfox

  • Member
  • Posts: 136
  • Ohio Subscription #108669
Re: Bone knife
« Reply #11 on: November 16, 2018, 09:52:22 am »
Wow that looks great
Logged
New to all of this primitive stuff. Just taking it all in, and learning every time I come here.

   Subscription # 108669
Pages: [1]
« previous next »