« previous next »
Pages: [1]

Author Topic: Plastic nocks  (Read 3115 times)

0 Members and 1 Guest are viewing this topic.

Offline Matt1986

  • Member
  • Posts: 7
Plastic nocks
« on: October 01, 2018, 06:31:42 am »
Will 5/16 nocks work on 11/32 shafts
Logged

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: Plastic nocks
« Reply #1 on: October 01, 2018, 07:55:55 am »
They will but it might net be safe. Just a guess though.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline Hawkdancer

  • Member
  • Posts: 5,040
Re: Plastic nocks
« Reply #2 on: October 01, 2018, 11:01:48 am »
I would say check the fit with lampblack, and see what kind of contact you are getting.  If the taper is the same, you should get a good fit
Hawkdancer
Logged
Life is far too serious to be taken that way!
Jerry

Offline Matt1986

  • Member
  • Posts: 7
Re: Plastic nocks
« Reply #3 on: October 01, 2018, 01:19:34 pm »
Thanks everyone. The taper fits good. Ther is a little taper showing were the nock is smaller in diameter but it it making full contact with the nock
Logged

Offline JEB

  • Member
  • Posts: 1,735
Re: Plastic nocks
« Reply #4 on: October 01, 2018, 06:48:01 pm »
They will. Some like a smaller nock. If you need some 11/32 I have lots of them and would be willing to give you some. Just need an address.
Logged

Offline Matt1986

  • Member
  • Posts: 7
Re: Plastic nocks
« Reply #5 on: October 05, 2018, 09:31:26 pm »
Thanks a lot bud
Logged

Offline JEB

  • Member
  • Posts: 1,735
Re: Plastic nocks
« Reply #6 on: October 06, 2018, 01:13:13 pm »
You want the snap on type or the speed nock and any color choice (if I have the color)
Logged

Offline Matt1986

  • Member
  • Posts: 7
Re: Plastic nocks
« Reply #7 on: October 06, 2018, 06:46:04 pm »
Snapon. Any color will do
Logged

Offline Matt1986

  • Member
  • Posts: 7
Re: Plastic nocks
« Reply #8 on: October 07, 2018, 08:59:53 pm »
Pm sent. Jeb. Thanks alot
Logged

Offline JEB

  • Member
  • Posts: 1,735
Re: Plastic nocks
« Reply #9 on: October 19, 2018, 03:45:06 pm »
Did the nocks arrive?
Logged
Pages: [1]
« previous next »