« previous next »
Pages: [1]

Author Topic: Idea for stave vise.  (Read 2088 times)

0 Members and 1 Guest are viewing this topic.

Offline Morgan

  • Member
  • Posts: 1,028
Idea for stave vise.
« on: September 08, 2018, 01:18:04 pm »
https://youtu.be/RLFFbHpngsg

Super simple idea and I think it would work great for working bows. I deal with these cylinders daily at work and can’t believe I hadn’t ever thought of usin one like this. Would allow hands and feet free clamping without constantly cranking a vise open and shut.
Logged

Offline High-Desert

  • Member
  • Posts: 876
Re: Idea for stave vise.
« Reply #1 on: September 08, 2018, 09:50:52 pm »
That would be sweet!
Logged
Eric

Offline lebhuntfish

  • Member
  • Posts: 3,823
  • If the wood will bend, I'll make it beautiful!
Re: Idea for stave vise.
« Reply #2 on: September 10, 2018, 09:05:21 am »
I thats a cool idea!

Patrick
Logged
Once an Eagle Scout, always an Eagle Scout!

Missouri, where all the best wood is! Well maybe not the straightest!

Building a bow has been the most rewarding, peaceful, and frustrating things I have ever made with my own two hands!

Offline Hawkdancer

  • Member
  • Posts: 5,039
Re: Idea for stave vise.
« Reply #3 on: September 10, 2018, 10:15:13 am »
Pretty neat!  Just have to find space for it, and the compressor, the little cylinder, and hose! And the time to build it!  It does look solid!
Hawkdancer
Logged
Life is far too serious to be taken that way!
Jerry

Offline Del the cat

  • Member
  • Posts: 8,322
    • Derek Hutchison Native Wood Self Bows
Re: Idea for stave vise.
« Reply #4 on: September 10, 2018, 10:23:15 am »
Grrr. (engage grumpy mode ;)  ) It's overthink! Yeah, lets run a noisy compressor and use a load of fancy pneumatics to do what can be done with your foot and some leverage (probably more reliably too  :) )
Probably more suited to holding compounds (spits on floor)
(grumpy mode off)
Del  :)
Ok it would be cool.. just a little  >:(
Logged
Health warning, these posts may contain traces of nut.

Offline bjrogg

  • Member
  • Posts: 10,987
  • Cedar Pond
Re: Idea for stave vise.
« Reply #5 on: September 10, 2018, 10:36:32 am »
Quote from: Del the cat on September 10, 2018, 10:23:15 am
Grrr. (engage grumpy mode ;)  ) It's overthink! Yeah, lets run a noisy compressor and use a load of fancy pneumatics to do what can be done with your foot and some leverage (probably more reliably too  :) )
Probably more suited to holding compounds (spits on floor)
(grumpy mode off)
Del  :)
Ok it would be cool.. just a little  >:(

That's kinda what I was thinking to Del. It also seems to not have much range. I suppose it could be modified but not sure I'm sold on this one.
Bjrogg
Logged
A hot cup of coffee and a beautiful sunrise

Offline Morgan

  • Member
  • Posts: 1,028
Re: Idea for stave vise.
« Reply #6 on: September 10, 2018, 12:53:29 pm »
Quote from: Del the cat on September 10, 2018, 10:23:15 am
Grrr. (engage grumpy mode ;)  ) It's overthink! Yeah, lets run a noisy compressor and use a load of fancy pneumatics to do what can be done with your foot and some leverage (probably more reliably too  :) )
Probably more suited to holding compounds (spits on floor)
(grumpy mode off)
Del  :)
Ok it would be cool.. just a little  >:(
Ha! My compressor is outside my shop and I have air chucks all over. I reckon I shouldn’t use a chainsaw, bandsaw, or anything else to make it easier lol.
The amount of throw depends on length of cylinder.
Logged

Offline Taxus brevifolia

  • Member
  • Posts: 304
Re: Idea for stave vise.
« Reply #7 on: September 10, 2018, 05:39:30 pm »
It's cool and everything but foot pressure is already working great for me and it's already paid for
Logged
Pages: [1]
« previous next »