Author Topic: Take down osage (Read 3368 times)

selfbow joe · « **Reply #15 on:** August 26, 2018, 08:39:55 am »

Very cool takedown Bow

ntvbowyer1969 · « **Reply #16 on:** August 26, 2018, 10:27:05 am »

very neat takedown connection. The rest of the bow is nice also. Great job

DC · « **Reply #17 on:** August 26, 2018, 10:28:42 am »

What's the wall thickness of the sleeves?

Jim Davis · « **Reply #18 on:** August 26, 2018, 12:15:10 pm »

I don't know how thick the pipe is in the OP's example. The tubing I used is right at .098" wall thickness.

Hans H · « **Reply #19 on:** August 26, 2018, 01:45:06 pm »

cool bow with nice bends.
Hans

rps3 · « **Reply #20 on:** August 26, 2018, 03:29:11 pm »

Thanks again for the great comments. DC, my crude measurement shows 1/8 inch.

DC · « **Reply #21 on:** August 26, 2018, 05:04:52 pm »

Thanks

Primitive Archer