Author Topic: Take down osage  (Read 3331 times)

0 Members and 2 Guests are viewing this topic.

Offline selfbow joe

  • Member
  • Posts: 996
  • 1-812-344-1590
Re: Take down osage
« Reply #15 on: August 26, 2018, 08:39:55 am »
Very cool takedown Bow

Offline ntvbowyer1969

  • Member
  • Posts: 322
Re: Take down osage
« Reply #16 on: August 26, 2018, 10:27:05 am »
very neat takedown connection. The rest of the bow is nice also. Great job

Offline DC

  • Member
  • Posts: 10,396
Re: Take down osage
« Reply #17 on: August 26, 2018, 10:28:42 am »
What's the wall thickness of the sleeves?

Offline Jim Davis

  • Member
  • Posts: 1,350
  • Reparrows
    • Reparrows
Re: Take down osage
« Reply #18 on: August 26, 2018, 12:15:10 pm »
I don't know how thick the pipe is in the OP's example. The tubing I used is right at .098" wall thickness.
Jim Davis

Kentucky--formerly Maine

Offline Hans H

  • Member
  • Posts: 420
Re: Take down osage
« Reply #19 on: August 26, 2018, 01:45:06 pm »
cool bow with nice bends.
Hans
Hans,      Bavaria, Germany

Offline rps3

  • Member
  • Posts: 1,514
Re: Take down osage
« Reply #20 on: August 26, 2018, 03:29:11 pm »
Thanks again for the great comments. DC, my crude measurement shows 1/8 inch.

Offline DC

  • Member
  • Posts: 10,396
Re: Take down osage
« Reply #21 on: August 26, 2018, 05:04:52 pm »
Thanks