« previous next »
Pages: [1] 2

Author Topic: Yew backed with...  (Read 3259 times)

0 Members and 2 Guests are viewing this topic.

Offline upstatenybowyer

  • Member
  • Posts: 2,700
Yew backed with...
« on: August 01, 2018, 08:36:04 am »
hickory or ash? Which would you choose?

I'm making a 55# D/R bow. I can go as thin as 1/16" for the backing w/ either species. 
Logged
"Even as the archer loves the arrow that flies, so too he loves the bow that remains constant in his hands."

Nigerian Proverb

Offline PEARL DRUMS

  • Member
  • Posts: 14,079
  • }}}--CK-->
Re: Yew backed with...
« Reply #1 on: August 01, 2018, 08:46:45 am »
Hickory, hickory, hickory.
Logged
Only when the last tree has died and the last river has been poisoned and the last fish has been caught will we realize we cannot eat money.

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: Yew backed with...
« Reply #2 on: August 01, 2018, 08:59:11 am »
...hickory, hickory, hickory!   :OK
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline upstatenybowyer

  • Member
  • Posts: 2,700
Re: Yew backed with...
« Reply #3 on: August 01, 2018, 09:02:31 am »
Okay, 1/8 or 1/16?
Logged
"Even as the archer loves the arrow that flies, so too he loves the bow that remains constant in his hands."

Nigerian Proverb

Offline PEARL DRUMS

  • Member
  • Posts: 14,079
  • }}}--CK-->
Re: Yew backed with...
« Reply #4 on: August 01, 2018, 09:18:10 am »
Id stick with an 1/8". By the time you sand a bit you will be all set.
Logged
Only when the last tree has died and the last river has been poisoned and the last fish has been caught will we realize we cannot eat money.

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: Yew backed with...
« Reply #5 on: August 01, 2018, 09:23:19 am »
When I cut hickory backings I usually cut them to 3/16". After dressing both sides it usually comes out to 1/8" or slightly less.

ps. if you find the yew is getting too thin you can always reduce the hickory while it is on the bow.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline PEARL DRUMS

  • Member
  • Posts: 14,079
  • }}}--CK-->
Re: Yew backed with...
« Reply #6 on: August 01, 2018, 09:26:02 am »
I did just that on my lemonwood bow, Pat. I wanted to keep the lemonwood as deep as I could, so the last 5-8# came off the backer.
Logged
Only when the last tree has died and the last river has been poisoned and the last fish has been caught will we realize we cannot eat money.

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: Yew backed with...
« Reply #7 on: August 01, 2018, 09:30:25 am »
Can't do that with boo!  ;)
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline upstatenybowyer

  • Member
  • Posts: 2,700
Re: Yew backed with...
« Reply #8 on: August 01, 2018, 10:15:42 am »
Quote from: Pat B on August 01, 2018, 09:30:25 am
Can't do that with boo!  ;)

You can say that again! Found myself wishing I could on the last yew bow I tried to make.
Logged
"Even as the archer loves the arrow that flies, so too he loves the bow that remains constant in his hands."

Nigerian Proverb

Offline DC

  • Member
  • Posts: 10,396
Re: Yew backed with...
« Reply #9 on: August 01, 2018, 10:41:19 am »
Quote from: Pat B on August 01, 2018, 09:23:19 am
ps. if you find the yew is getting too thin you can always reduce the hickory while it is on the bow.

Edge grain or flat sawn Hickory?
Logged

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: Yew backed with...
« Reply #10 on: August 01, 2018, 11:05:48 am »
I always used edge or bias grained hickory but flat grain should work too.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline upstatenybowyer

  • Member
  • Posts: 2,700
Re: Yew backed with...
« Reply #11 on: August 01, 2018, 11:18:44 am »
Edge, w/ a bit of heart/sapwood mix.
Logged
"Even as the archer loves the arrow that flies, so too he loves the bow that remains constant in his hands."

Nigerian Proverb

Offline DC

  • Member
  • Posts: 10,396
Re: Yew backed with...
« Reply #12 on: August 01, 2018, 11:19:23 am »
So why can you reduce(tiller) the backing but you can't with a self bow? This has bothered me for a while and I can't sort it out. We sort of touched on it a while back.
Logged

Offline Del the cat

  • Member
  • Posts: 8,322
    • Derek Hutchison Native Wood Self Bows
Re: Yew backed with...
« Reply #13 on: August 01, 2018, 12:02:07 pm »
Quote from: DC on August 01, 2018, 11:19:23 am
So why can you reduce(tiller) the backing but you can't with a self bow? This has bothered me for a while and I can't sort it out. We sort of touched on it a while back.
'Cos backings are often edge grain (quarter sawn).
Del
Logged
Health warning, these posts may contain traces of nut.

Offline DC

  • Member
  • Posts: 10,396
Re: Yew backed with...
« Reply #14 on: August 01, 2018, 12:06:45 pm »
So if we made a self bow edge grain we could tiller back and belly? I'm not trying to be a jerk. this has bugged me for a while and I want to get it sorted. Hope Jeff doesn't mind :)
Logged
Pages: [1] 2
« previous next »