Author Topic: oak tree fell down  (Read 2797 times)

0 Members and 1 Guest are viewing this topic.

Offline nsherve

  • Member
  • Posts: 97
oak tree fell down
« on: July 31, 2018, 07:43:29 am »
The tree that fell over from weather (it's pretty good size) is a red oak. Is this good for arrows, or is a white oak a lot better? I've never made my own arrows and have been wanting to try it.

Also, anybody ever used/tried sweetgum and sycamore? Were they any good? I have plenty of other types of trees, but sweetgum and sycamore aren't any good for much...

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,617
Re: oak tree fell down
« Reply #1 on: July 31, 2018, 01:49:29 pm »
I wouldn't use any of these woods for arrows, bows yes but not arrows.
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline Mafort

  • Member
  • Posts: 423
Re: oak tree fell down
« Reply #2 on: July 31, 2018, 01:58:21 pm »
i made 6 arrows out of red oak and they are very stiff arrow shafts. seem to fly way better out of a heavy daw weight bow like an ELB more than anything. theyre tough to work as well.

Offline Danzn Bar

  • Member
  • Posts: 4,166
Re: oak tree fell down
« Reply #3 on: July 31, 2018, 02:56:09 pm »
I wouldn't use any of these woods for arrows, bows yes but not arrows.
+1 what PatB said...…….
DBar
Integrity is doing the right thing when no one is looking

Offline Mafort

  • Member
  • Posts: 423
Re: oak tree fell down
« Reply #4 on: July 31, 2018, 03:04:33 pm »
dont get me wrong. i wouldnt use them for arrow shafting at all. i was simply curious when i made them as to how well theyd work.

Offline Danzn Bar

  • Member
  • Posts: 4,166
Re: oak tree fell down
« Reply #5 on: July 31, 2018, 03:10:36 pm »
dont get me wrong. i wouldnt use them for arrow shafting at all. i was simply curious when i made them as to how well theyd work.
No problem....I understand.
DBar
Integrity is doing the right thing when no one is looking

Offline nsherve

  • Member
  • Posts: 97
Re: oak tree fell down
« Reply #6 on: July 31, 2018, 05:30:12 pm »
You wouldn't use the red oak for arrows because it's too stiff? I just finished a 70lb draw out of persimmon the other day, so I imagine it could do well with stiff arrows...but I'm definitely not an expert. I need to cut the tree up anyway, it's blocking the back road, so I may try to do it.

Offline nsherve

  • Member
  • Posts: 97
Re: oak tree fell down
« Reply #7 on: July 31, 2018, 05:33:37 pm »
I could cut them longer than usual...that should make them a little more flexible, yea?

Offline Mafort

  • Member
  • Posts: 423
Re: oak tree fell down
« Reply #8 on: July 31, 2018, 05:42:56 pm »
they flew really well out of my bow. though id stick with 70 pound draw or more. id also reinforce the nock point with horn if you go over 100.