« previous next »
Pages: [1]

Author Topic: Osage bow design  (Read 3799 times)

0 Members and 1 Guest are viewing this topic.

Offline Jakesnyder

  • Member
  • Posts: 458
Osage bow design
« on: August 01, 2018, 06:44:45 pm »
I know there is a million answers to this question but I am looking for a good hunting bow design. I have a 25in. Draw length. I'm going for maybe 58ntn?
When laying out a bow with a 4in handle do you always go up an inch from center and down 3 inches?
Logged

Offline JW_Halverson

  • Member
  • Posts: 11,917
Re: Osage bow design
« Reply #1 on: August 01, 2018, 08:49:35 pm »
I am getting really partial to bend-thru-the-handle designs because of their utter simplicity.  I think most people should start out with this design and then later tackle a stiff handled design. 

What are you hunting?  What kind of habitat are you hunting? What is your bowmaking history and experience?
Logged
Guns have triggers. Bicycles have wheels. Trees and bows have wooden limbs.

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,618
Re: Osage bow design
« Reply #2 on: August 01, 2018, 08:51:45 pm »
I place my handles in the center of the bow, 2" on either side of the center. Two inch fades, 1 1/2" wide at the fades and out 6" before tapering to 3/4" tips for now. Once you brace the bow and if the string lines up properly reduce the tip width to 3/8" starting the taper 6" to 8" back from the tip. If the string track is off to one side you can remove width from the 3/4" tip to get the string to line up.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline Jakesnyder

  • Member
  • Posts: 458
Re: Osage bow design
« Reply #3 on: August 02, 2018, 03:52:02 am »
I have made some hickory bows but this is my first osage bow. I love shooting bendy handle bows. But everyone I've made out of hickory took set really bad. I'm hunting deer and small game. I dont understand why they arnt more popular? If I decide to make a bendy handle bow what are some good dimentions using osage?
Logged

Offline Jakesnyder

  • Member
  • Posts: 458
Re: Osage bow design
« Reply #4 on: August 02, 2018, 04:51:56 am »
I love Ryan gills osage hunter design. Just not sure on the exact dimentions.
Logged

Offline simson

  • Member
  • Posts: 2,310
  • stonehill-primitive-bows
    • stonehill-primitive-bows
Re: Osage bow design
« Reply #5 on: August 02, 2018, 09:42:41 am »
With a draw of only 25, I would go max with a 54 length. A design which can handle a long time braced, stiff handle for comfort, no piky tips, a bit of camo (stain, skins, ..)
Weylin has recently posted a great osage hunting bow!
Logged
Simon
Bavaria, Germany

Offline Jakesnyder

  • Member
  • Posts: 458
Re: Osage bow design
« Reply #6 on: August 02, 2018, 04:46:12 pm »
Hey pat is that a recurve design your describing or longbow design?  56 inch tip to tip for a 25 inch draw length?
Logged

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,618
Re: Osage bow design
« Reply #7 on: August 02, 2018, 04:48:05 pm »
Longbow. For a recurve I keep the limbs wide most of the way out.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline sleek

  • Member
  • Posts: 6,745
Re: Osage bow design
« Reply #8 on: August 02, 2018, 06:30:06 pm »
Wow, for a 25 inch draw bendy, id bet you could go to 48 inches ntn. Just keep it wide the first 3rd, and small sharp hooks at the end.
Logged
Tread softly and carry a bent stick.

Dont seek your happiness through the approval of others

Offline Jakesnyder

  • Member
  • Posts: 458
Re: Osage bow design
« Reply #9 on: August 02, 2018, 07:22:29 pm »
Why are bendy handle bows not popular for hunting with?
Logged

Offline sleek

  • Member
  • Posts: 6,745
Re: Osage bow design
« Reply #10 on: August 02, 2018, 07:26:23 pm »
Who says they arent? They are real popular among the bendy handle crowd. Lol

But honestly,  its probably just a taste thing.
Logged
Tread softly and carry a bent stick.

Dont seek your happiness through the approval of others

Offline George Tsoukalas

  • Member
  • Posts: 9,425
    • Traditional and Primitive Archers
Re: Osage bow design
« Reply #11 on: August 02, 2018, 07:55:02 pm »
These days I place the handle 2 inches on either side of center and the arrow pass at 1.25 in. but that depends on tiller.  That way I can turn the bow around if need be.
There is a discussion of handle styles on my site.
Jawge
http://traditionalarchery101.com
Logged
Set Happens!
If you ain't breakin' you ain't makin!

Offline osage outlaw

  • Member
  • Posts: 11,962
Re: Osage bow design
« Reply #12 on: August 02, 2018, 09:03:49 pm »
Short bendy handle bows can be harder to shoot accurately than a longer design.  The longer bow will be more forgiving.

Why do you think your hickory bows took so much set?  Was it the moisture content?  I would be trying to figure out that problem before making any shorter higher stressed bows.
Logged
I started out with nothin' and I still got most of it left

Offline Jakesnyder

  • Member
  • Posts: 458
Re: Osage bow design
« Reply #13 on: August 03, 2018, 12:35:56 am »
Yea they were not dry enough
Logged

Offline Jakesnyder

  • Member
  • Posts: 458
Re: Osage bow design
« Reply #14 on: August 04, 2018, 04:48:42 am »
I decided to go with Pat's design. Now I have a couple pin knots by the fades will that be a problem? With this design can I flip the tips just a little with no problem? The stave is a really premium stave from Mike yancey with no natural reflex or reflex. So I thought if I can flip the tips just a little I can get more speed out of it. Its 60in try and I'm going for 50-60 lbs at 25in
Logged
Pages: [1]
« previous next »