« previous next »
Pages: [1]

Author Topic: shafts, feathers, B-50 string material, et al  (Read 2913 times)

0 Members and 1 Guest are viewing this topic.

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
shafts, feathers, B-50 string material, et al
« on: August 02, 2018, 11:42:15 am »
I have a few things I would like to trade. I don't need anything specifically, what ya got?  :OK
 3 bundles of POC shafts, one with 6 shafts, one with 7 and another of 7 with osage nock spines installed.(spine about 45# to 60#)
 3 bundles of hill cane, 15 canes per bundle.
 3 partial spools on B-50 string material.
 about 25 cut nails(2 1/2" long) from a house built in the 1940's. These sparked when pulled with a hammer.
Assorted wild turkey feathers; primary, secondary, tail, some full feathers, some split(most not shown).
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline Hawkdancer

  • Member
  • Posts: 5,040
Re: shafts, feathers, B-50 string material, et al
« Reply #1 on: August 02, 2018, 09:50:47 pm »
Pat,
Pm sent
Hawkdancer
Logged
Life is far too serious to be taken that way!
Jerry

Offline DuBois

  • Member
  • Posts: 2,020
Re: shafts, feathers, B-50 string material, et al
« Reply #2 on: August 02, 2018, 11:56:16 pm »
Cut nails must make good target points?
Logged

Offline mullet

  • Global Moderator
  • Member
  • Posts: 22,911
  • Eddie Parker
Re: shafts, feathers, B-50 string material, et al
« Reply #3 on: August 05, 2018, 08:28:12 am »
Sent you a PM.
Logged
Lakeland, Florida
 If you have to pull the trigger, is it really archery?
Pages: [1]
« previous next »