« previous next »
Pages: [1]

Author Topic: Backed yew question  (Read 1428 times)

0 Members and 1 Guest are viewing this topic.

Offline hoosierf

  • Member
  • Posts: 492
Backed yew question
« on: June 28, 2018, 09:43:01 am »
I have a pair of yew billets spliced that look to be mostly sap wood with only small pin knots here and there. I was able to avoid any big knots.   The billets were already decrowned when i acquired them so they are basically boards. What would you recommend for a backing?  I have hickory, bamboo, silk, linen, flax roving, and sinew ready to go but could make up some quarter sawn ash, birch or elm as well. Thx for the advice.
Logged

Offline Del the cat

  • Member
  • Posts: 8,322
    • Derek Hutchison Native Wood Self Bows
Re: Backed yew question
« Reply #1 on: June 28, 2018, 10:23:43 am »
Not sure I understand correctly, so apologies if I've got the wrong end of the stick.
If you have sapwood, you don't need to back it.
Decrowned is fine, (as long as there isn't a ton of heartwood showing all along through the back.
Ring violations running along the bow are fine, even some running across are ok, if they are feathered and don't have major sharp discontinuities.
Del
« Last Edit: June 28, 2018, 10:26:47 am by Del the cat »
Logged
Health warning, these posts may contain traces of nut.

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,618
Re: Backed yew question
« Reply #2 on: June 28, 2018, 10:40:24 am »
Please post pics.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline hoosierf

  • Member
  • Posts: 492
Re: Backed yew question
« Reply #3 on: June 28, 2018, 03:33:45 pm »
Will post pics when i get home.
Logged
Pages: [1]
« previous next »