« previous next »
Pages: [1]

Author Topic: String length  (Read 2294 times)

0 Members and 1 Guest are viewing this topic.

Offline DC

  • Member
  • Posts: 10,396
String length
« on: July 21, 2018, 05:48:46 pm »
For a 66-68" bow how much do you have to change the string length to change the brace height by an inch? I think it will be easier on my hands to move the nock rather than make another string. :)
Logged

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: String length
« Reply #1 on: July 21, 2018, 06:48:28 pm »
Twist it up 10 times and check. An inch is a pretty good bit to make up by twisting though. Is this a Flemish twist string?
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline DC

  • Member
  • Posts: 10,396
Re: String length
« Reply #2 on: July 21, 2018, 06:53:32 pm »
Yes it's Flemish. The string is too short so I was going to move the nocks in. But you're right. If I twist it up 10 turns and measure the change in string length and then measure the change in brace height it will give me the info I need to sort it out.
Thanks
Logged

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: String length
« Reply #3 on: July 21, 2018, 06:57:14 pm »
Let us know how it works out.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline DC

  • Member
  • Posts: 10,396
Re: String length
« Reply #4 on: July 21, 2018, 07:08:34 pm »
Yup, but I think it will be one of those gradually changing things where every little thing changes it some.
Logged

Offline Eric Krewson

  • Member
  • Posts: 5,432
Re: String length
« Reply #5 on: July 21, 2018, 07:13:45 pm »
If you twist it up 10 times it will get even shorter, make another string. Cutting new nocks will up the poundage and may throw the tiller off.
Logged

Offline DC

  • Member
  • Posts: 10,396
Re: String length
« Reply #6 on: July 21, 2018, 07:52:21 pm »
I would make another but it's three hours since I made it and my hands still hurt. Take my advice, don't get old :D :D
Logged

Offline Eric Krewson

  • Member
  • Posts: 5,432
Re: String length
« Reply #7 on: July 21, 2018, 09:43:17 pm »
I am 70, I don't like making strings but sometimes you have to.

I have arthritic hands and bad carpal tunnel problems in my hands from 20 years of working down osage staves with drawknives. I worked a lot in my shop this afternoon and will have to wear my wrist braces when I go to bed tonight or my hands will go painfully numb and keep me awake.
« Last Edit: July 21, 2018, 09:48:25 pm by Eric Krewson »
Logged

Offline Del the cat

  • Member
  • Posts: 8,322
    • Derek Hutchison Native Wood Self Bows
Re: String length
« Reply #8 on: July 22, 2018, 03:53:03 am »
Make continuous loop strings, relatively quick and easy, served loops, right length every time if you use and long string and Del's patent ;) adjuster first to get the right length.
Del
Logged
Health warning, these posts may contain traces of nut.

Offline George Tsoukalas

  • Member
  • Posts: 9,425
    • Traditional and Primitive Archers
Re: String length
« Reply #9 on: July 22, 2018, 07:20:25 am »
70 here too, DC. Thank God. Are you twisting the whole string or just the loops and down to just beyond the tag ends which is what I do? Jawge
Logged
Set Happens!
If you ain't breakin' you ain't makin!

Offline Dances with squirrels

  • Member
  • Posts: 1,222
Re: String length
« Reply #10 on: July 22, 2018, 08:41:59 am »
You can make strings with a timber hitch on one end.
Logged
Straight wood may make a better bow, but crooked wood makes a better bowyer

Offline DC

  • Member
  • Posts: 10,396
Re: String length
« Reply #11 on: July 22, 2018, 08:54:42 am »
You win Eric. I'm just a wuss. I could have it way worse ;D ;D
You know, it might be time to convert to continuous. Way easier on the hands :) I just like the look of Flemish.
Just twisting the ends as little as I can :)
I've never had good luck with timber hitches. Even with all the fixes they still seem to slip on FF
Logged

Offline bushboy

  • Member
  • Posts: 2,256
Re: String length
« Reply #12 on: July 22, 2018, 09:01:23 am »
I use 9 strands made into 3 bundles to make a rope ,spliced in a loop.this is a old b55 string that I didn't bother to serve.all the twisting is done with a cordless drill,something I came up with.
Logged
Some like motorboats,I like kayaks,some like guns,I like bows,but not the wheelie type.

Offline DC

  • Member
  • Posts: 10,396
Re: String length
« Reply #13 on: July 22, 2018, 12:45:14 pm »
Quote from: Pat B on July 21, 2018, 06:57:14 pm
Let us know how it works out.

Not well. Whether the string is still settling in or what but I would add 10 twists and the BH would go up and then over 15 min go back to where it was. I started at almost 0 twists so maybe not much happens in the first 20 twists. I'll let it soak for a while and see.
Logged
Pages: [1]
« previous next »