« previous next »
Pages: [1]

Author Topic: Does polyurethane work on ipe if you degrease it first?  (Read 1589 times)

0 Members and 1 Guest are viewing this topic.

Offline youngbowyer33

  • Member
  • Posts: 606
Does polyurethane work on ipe if you degrease it first?
« on: June 21, 2018, 03:53:47 pm »
Hello. I was reading that a lot of people seal ipe first with shellac then use other finishes. Does anyone have any experience using polyurethane after wiping the bow down with mineral spirits or rubbing alcohol?

I don't want to buy a can of shellac just to use for a few coats.

Thanks
Logged
"All we have to decide is what to do with the time that is given to us"

Offline hoosierf

  • Member
  • Posts: 492
Re: Does polyurethane work on ipe if you degrease it first?
« Reply #1 on: June 22, 2018, 07:38:48 am »
I’d go with boiled linseed oil or tung oil then johnson’s wax. Polish it with a piece of paper bag to finish and she’ll shine right up. Then you don’t need to worry about adhesion and the finish is easily refreshed or repaired down the road.
Logged

Offline PEARL DRUMS

  • Member
  • Posts: 14,079
  • }}}--CK-->
Re: Does polyurethane work on ipe if you degrease it first?
« Reply #2 on: June 22, 2018, 10:40:57 am »
I suggest Helmsman clear satin in a rattle can, you will have no problems and will never have to touch it again.
Logged
Only when the last tree has died and the last river has been poisoned and the last fish has been caught will we realize we cannot eat money.

Offline PEARL DRUMS

  • Member
  • Posts: 14,079
  • }}}--CK-->
Re: Does polyurethane work on ipe if you degrease it first?
« Reply #3 on: June 22, 2018, 10:41:20 am »
Don't degrease it, that only draws more oil to the surface.
Logged
Only when the last tree has died and the last river has been poisoned and the last fish has been caught will we realize we cannot eat money.

Offline leonwood

  • Member
  • Posts: 762
    • Leonwood Bows
Re: Does polyurethane work on ipe if you degrease it first?
« Reply #4 on: June 22, 2018, 01:59:03 pm »
No need to degrease before finishing, just sand and put your finish on. I tried dozens of different finishes. Poly, waterbased, acrylic, etc... they all work fine on ipe
Logged

Offline youngbowyer33

  • Member
  • Posts: 606
Re: Does polyurethane work on ipe if you degrease it first?
« Reply #5 on: June 22, 2018, 03:31:13 pm »
Ok thanks, I'll go ahead and try the poly like normal
Logged
"All we have to decide is what to do with the time that is given to us"
Pages: [1]
« previous next »