Author Topic: The big question  (Read 1180 times)

0 Members and 1 Guest are viewing this topic.

Offline Taxus brevifolia

  • Member
  • Posts: 304
The big question
« on: May 08, 2018, 01:52:35 am »
From this stave of Western Juniper, should I take:

a 47" flatbow, straight & clear,
or a 72" recurve, with a knot in the middle of one mid-limb?

https://youtu.be/dDG3SetgB7M

Offline JNystrom

  • Member
  • Posts: 240
Re: The big question
« Reply #1 on: May 08, 2018, 02:44:25 am »
No point of making 72" long recurve. So i vote for under 40" hupa paddle bow.  :OK

Offline Redhand

  • Member
  • Posts: 704
  • Marlen Murdock PM109458
Re: The big question
« Reply #2 on: May 08, 2018, 06:36:46 am »
I would suggest a 47" SINEW BACKED flat bow.
Northern Ute

Offline Jim Davis

  • Member
  • Posts: 1,350
  • Reparrows
    • Reparrows
Re: The big question
« Reply #3 on: May 08, 2018, 09:04:56 am »
I agree on the short bow. Even a clear stave of juniper is not at its best as a lengthy bow.
Jim Davis

Kentucky--formerly Maine

Offline DuBois

  • Member
  • Posts: 2,020
Re: The big question
« Reply #4 on: May 08, 2018, 09:17:13 am »
Who are you making it for and what's their draw length.
Short bow with sinew for their specs is my vote. Could get rid of some of that deflex that way too.

Offline BowEd

  • Member
  • Posts: 9,390
  • BowEd
Re: The big question
« Reply #5 on: May 08, 2018, 09:33:21 am »
Looks like a nice worth while project you got there.Someday I'll mess with juniper.Closest so far has been red cedar.Looks like your stave came off a trunk?Sinew and good juniper from Chucks' bows I've seen are very nice bows.
BowEd
You got to stand for something or you'll fall for anything.
Ed

Offline Whiskeyjet

  • Member
  • Posts: 115
Re: The big question
« Reply #6 on: May 08, 2018, 10:17:11 am »
I’d vote for a shorty/sinew.  Is it just me or is it wicked deflexed?

Offline Bryce

  • Global Moderator
  • Member
  • Posts: 3,125
  • Pacific Ghost Longbows
Re: The big question
« Reply #7 on: May 08, 2018, 12:38:19 pm »
Make a bow
Clatskanie, Oregon

Offline Taxus brevifolia

  • Member
  • Posts: 304
Re: The big question
« Reply #8 on: May 09, 2018, 09:19:13 am »
Ha Bryce wins the best -answer award! Yes off a trunk, and some deflex at one end but if I go for the short bow it won't be an issue. Making it for myself, and absolutely will be backed with sinew.

I can't adequately express my appreciation for this resource and your input, thanks very much guys