Primitive Archer
Welcome,
Guest
. Please
login
or
register
.
1 Hour
1 Day
1 Week
1 Month
Forever
Login with username, password and session length
Home
Help
Search
Calendar
Login
Register
Primitive Archer
»
Main Discussion Area
»
Arrows
»
Feather Fletching
« previous
next »
Print
Pages: [
1
]
Author
Topic: Feather Fletching (Read 2501 times)
0 Members and 1 Guest are viewing this topic.
Pinewood Archer
Member
Posts: 17
I'm just me,nothing special.
Feather Fletching
«
on:
July 19, 2018, 03:07:10 pm »
Is there any advantage/disadvantage to feather size,shape,length,number or stiffness?
Logged
Quality is not an act,it is a habit.~Aristotle
By a Carpenter mankind was made,and only by that Carpenter can mankind be remade.~Desiderius Erasmus
Pat B
Administrator
Member
Posts: 37,617
Re: Feather Fletching
«
Reply #1 on:
July 19, 2018, 03:21:16 pm »
Yes. Feathers act as rudders on the rear of an arrow by causing drag. The more surface area the more drag. Ideally you want only enough fletching to quickly straighten out the arrow's flight after it leaves the bow. For target arrows you can usually get away with relatively smaller feathers but with a hunting arrow with a broadhead you will probably need more fletching to get the arrow flight straightened out quickly.
Logged
Make the most of all that comes and the least of all that goes! Pat Brennan Brevard, NC
Pinewood Archer
Member
Posts: 17
I'm just me,nothing special.
Re: Feather Fletching
«
Reply #2 on:
July 19, 2018, 03:24:51 pm »
Am I correct in assuming the stiffer the feather the better it works?
Logged
Quality is not an act,it is a habit.~Aristotle
By a Carpenter mankind was made,and only by that Carpenter can mankind be remade.~Desiderius Erasmus
Pat B
Administrator
Member
Posts: 37,617
Re: Feather Fletching
«
Reply #3 on:
July 19, 2018, 03:28:55 pm »
Stiffer feathers are more durable and more effective.
Logged
Make the most of all that comes and the least of all that goes! Pat Brennan Brevard, NC
PEARL DRUMS
Member
Posts: 14,079
}}}--CK-->
Re: Feather Fletching
«
Reply #4 on:
July 20, 2018, 09:44:35 am »
My buddy made me a dozen with 5.5" high backs, he sold me on them. They are a bit slower and bit noisier, but the flight is amazing. You can get herky and jerky, short draw and still get good arrows off the bow.
Logged
Only when the last tree has died and the last river has been poisoned and the last fish has been caught will we realize we cannot eat money.
High-Desert
Member
Posts: 876
Re: Feather Fletching
«
Reply #5 on:
July 20, 2018, 10:16:38 am »
With hunting arrow, I will cut them an inch tall, shoot them, then cut them down 1/16"-1/8" (which is easy if you are using a burner) at a time until they are quiet. That way I get the max amount of stability with no noise.
Logged
Eric
Pat B
Administrator
Member
Posts: 37,617
Re: Feather Fletching
«
Reply #6 on:
July 20, 2018, 10:23:55 am »
pointed rear end causes more noise for me. Cut that point off and it quiets them down.
Logged
Make the most of all that comes and the least of all that goes! Pat Brennan Brevard, NC
Print
Pages: [
1
]
« previous
next »
Primitive Archer
»
Main Discussion Area
»
Arrows
»
Feather Fletching