« previous next »
Pages: [1]

Author Topic: how narrow for tips?  (Read 2769 times)

0 Members and 1 Guest are viewing this topic.

Offline benjamin

  • Member
  • Posts: 105
how narrow for tips?
« on: March 27, 2008, 08:05:32 pm »
How narrow have you gone with your nocks? I mean the part inside of the string groves. Is there a "safe" rule for osage or other wight woods? The narrowest I've ever gone was 1/4'' inside of the string groves.
Logged

Offline Hillbilly

  • Member
  • Posts: 8,248
  • I like tater tots.
Re: how narrow for tips?
« Reply #1 on: March 27, 2008, 08:25:27 pm »
I usually make them about 3/8" or so outside the grooves. I've seen some tiny ones posted on here.
Logged
Smoky Mountains, NC

NeolithicHillbilly@gmail.com

Progress might have been all right once but it's gone on for far too long.

Offline Coo-wah-chobee

  • Member
  • Posts: 2,503
Re: how narrow for tips?
« Reply #2 on: March 27, 2008, 08:28:06 pm »
Usually like Hillbilly said, 3/8 " but I have made them 3/16 ".........bob
Logged

Offline Kegan

  • Member
  • Posts: 2,676
Re: how narrow for tips?
« Reply #3 on: March 27, 2008, 08:43:19 pm »
3/8" or less. But it makes it easier to use half pin nocks.

[attachment deleted by admin]
Logged

Offline Pappy

  • Global Moderator
  • Member
  • Posts: 32,137
  • if you have to ask you wouldn't understand ,Tenn.
Re: how narrow for tips?
« Reply #4 on: March 28, 2008, 07:32:30 am »
I do the same,3/8 outside and cut them file deep with a 5/32 chain saw file,never mesured it
inside but I guess wit a little figuring I could find out.I guess that would be about 1/16 never
had a problem,but I don't build my bows much over 50lbs.That seem pretty thin,never really
thought about it before.I also never cut across the back unless I overlay the tip.I do that
sometime and sometime I don't. :) There really isn't as much presure as you would think.  :)
    Pappy

Logged
Clarksville,Tennessee
TwinOaks Bowhunters
Life is Good
Pages: [1]
« previous next »