« previous next »
Pages: [1] 2

Author Topic: Knife work  (Read 11144 times)

0 Members and 1 Guest are viewing this topic.

Offline bubby

  • Member
  • Posts: 11,054
Knife work
« on: March 22, 2018, 09:03:05 pm »
I got a little time between rain and got a couple file knives bevels ground. I heat them to past magnetic and just let them cool in the forge to anneal them first. I use salt to check as it melts at 1475 or right about there which is where you want it
Logged
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

Offline burchett.donald

  • Member
  • Posts: 2,437
Re: Knife work
« Reply #1 on: March 22, 2018, 11:31:46 pm »
       Looking good Bubby, like the blade design... (-P
                                                                                             Don
Logged
Genesis 27:3 Now therefore take, I pray thee, thy weapons, thy quiver and thy bow, and go out to the field, and take me some venison;

Offline KHalverson

  • Member
  • Posts: 758
Re: Knife work
« Reply #2 on: March 23, 2018, 06:28:08 am »
Nice grinds.
Logged

Offline bubby

  • Member
  • Posts: 11,054
Re: Knife work
« Reply #3 on: March 23, 2018, 07:21:44 am »
Thanks guys
Logged
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

Offline Danzn Bar

  • Member
  • Posts: 4,166
Re: Knife work
« Reply #4 on: March 25, 2018, 03:32:37 pm »
I like both styles, looks good.
DBar
Logged
Integrity is doing the right thing when no one is looking

Offline osage outlaw

  • Member
  • Posts: 11,962
Re: Knife work
« Reply #5 on: March 25, 2018, 04:44:29 pm »
Those are going to look great.
Logged
I started out with nothin' and I still got most of it left

Offline vinemaplebows

  • Member
  • Posts: 1,419
Re: Knife work
« Reply #6 on: March 26, 2018, 09:45:35 pm »
Those are nice! Are they comparable in workability, or was there any difference in the metal/s. I am unclear on whether all files are made from the same metal.
Logged
Debating is an intellectual exchange of differing views...with no winners.

Offline bubby

  • Member
  • Posts: 11,054
Re: Knife work
« Reply #7 on: March 26, 2018, 10:48:45 pm »
Quote from: vinemaplebows on March 26, 2018, 09:45:35 pm
Those are nice! Are they comparable in workability, or was there any difference in the metal/s. I am unclear on whether all files are made from the same metal.

There is a difference between files, I always do a snap test to make sure they will harden. I heat to non magnetic and quench, then hit it with a hammer if it hardened it will break right off. I do this to the tang. These came from the same file if I remember right
Logged
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

Offline Stoner

  • Member
  • Posts: 356
Re: Knife work
« Reply #8 on: March 27, 2018, 04:56:11 am »
Those are sweet. John
Logged

Offline Knoll

  • Member
  • Posts: 3,016
  • Mikey
Re: Knife work
« Reply #9 on: March 27, 2018, 05:19:24 am »
How do ya find time to sleep?   ???    ;)    ???
Logged
... alone in distant woods or fields, in unpretending sproutlands or pastures tracked by rabbits, even in a bleak and, to most, cheerless day .... .  I suppose that this value, in my case, is equivalent to what others get by churchgoing & prayer.  Hank Thoreau, 1857

Offline bubby

  • Member
  • Posts: 11,054
Re: Knife work
« Reply #10 on: March 27, 2018, 07:34:27 am »
Quote from: Knoll on March 27, 2018, 05:19:24 am
How do ya find time to sleep?   ???    ;)    ???

Time to what ???? LOL
Logged
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

Offline Hawkdancer

  • Member
  • Posts: 5,040
Re: Knife work
« Reply #11 on: March 27, 2018, 10:58:40 am »
Very nice looking grinds!  When you "salt test", you use rough going and drop some on the blade?  I'm not a smithy, by any means, so these are new skills.  Thanks,
Hawkdancer
Logged
Life is far too serious to be taken that way!
Jerry

Offline bubby

  • Member
  • Posts: 11,054
Re: Knife work
« Reply #12 on: March 27, 2018, 11:40:06 am »
When it looks hot I put some course salt on it and when it melts it is hot enough for file steel 1080-1094 is what a lot of them are
Logged
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

Offline Tracker0721

  • Member
  • Posts: 736
Re: Knife work
« Reply #13 on: March 28, 2018, 07:46:34 am »
Good tip about the salt! Nice looking bevels too
Logged
May my presence go unnoticed, may my shot be true, may the blood trail be short. Amen.

Offline Hawkdancer

  • Member
  • Posts: 5,040
Re: Knife work
« Reply #14 on: March 28, 2018, 11:54:06 am »
Bubbly,
When do you cut the haft in.  I assume you have a template for the pattern.  I have much to learn!
Hawkdancer
Logged
Life is far too serious to be taken that way!
Jerry
Pages: [1] 2
« previous next »