« previous next »
Pages: 1 [2]

Author Topic: Homemade cabinet scraper holder?  (Read 3851 times)

0 Members and 1 Guest are viewing this topic.

Offline gfugal

  • Member
  • Posts: 746
Re: Homemade cabinet scraper holder?
« Reply #15 on: March 16, 2018, 11:54:08 am »
So have you guys just been threading that screw/bolt into the wood, and it's held up without loosening up?
Logged
Greg,
No risk, no gain. Expand the mold and try new things.

Offline DC

  • Member
  • Posts: 10,396
Re: Homemade cabinet scraper holder?
« Reply #16 on: March 16, 2018, 12:44:38 pm »
If you tap the hole and then soak it in CA and then tap it again(when it's dry) it's almost like threads in metal.
Logged

Offline PatM

  • Member
  • Posts: 6,737
Re: Homemade cabinet scraper holder?
« Reply #17 on: March 16, 2018, 06:47:30 pm »
Not hard to epoxy a couple of threaded inserts in.  You can just use Chicago bolts.
Logged

Offline Marc St Louis

  • Administrator
  • Member
  • Posts: 7,877
  • Keep it flexible
    • Marc's Bows and Arrows
Re: Homemade cabinet scraper holder?
« Reply #18 on: March 16, 2018, 07:47:15 pm »
No need to do anything but tap the threads in hardwood.  It holds up quite well.  I used Elm because of the interlocking grain but I'm sure HHB or Hickory would also work well
Logged
Home of heat-treating, Corbeil, On.  Canada

Marc@Ironwoodbowyer.com
Pages: 1 [2]
« previous next »