« previous next »
Pages: [1]

Author Topic: 12# bow  (Read 1444 times)

0 Members and 1 Guest are viewing this topic.

Offline Badger

  • Member
  • Posts: 8,124
12# bow
« on: February 12, 2018, 12:34:51 pm »
  I have been commissioned to make a bow 12# @ 26". I am kind of looking forward to it. I plan to make it the same way I would make a 50# bow that was 6" wide. My plan is short working area maybe 8" on each limb and ultra slim tips and outer limbs with about 6" or 7" reflex. I will post pics when done if I can figure out how. My goal is a 200 grain arrow at about 160 fps. I had no idea how light 12# really is until I started playing with the little bow. It feels pretty tight on a mini bow. Hard to imagine getting any kind of power out of it. If I can get the arrows down below 200 grains it would help a bit also.
Logged

Offline k-hat

  • Member
  • Posts: 1,058
Re: 12# bow
« Reply #1 on: February 12, 2018, 12:38:52 pm »
Sounds fun Steve, looking forward to seeing it, sounds like a sweet design! 
Logged

Offline PEARL DRUMS

  • Member
  • Posts: 14,079
  • }}}--CK-->
Re: 12# bow
« Reply #2 on: February 12, 2018, 01:01:34 pm »
160 FPS from 12#? That would be borderline miraculous, Steve. Just making a bow draw 12# @ 26# seems awfully "mushy" to me?
Logged
Only when the last tree has died and the last river has been poisoned and the last fish has been caught will we realize we cannot eat money.

Offline Badger

  • Member
  • Posts: 8,124
Re: 12# bow
« Reply #3 on: February 12, 2018, 01:04:54 pm »

  I did a quickie test piece just to see what it would feel like and it had nothing! Pure mush. At first I thought it was a waste of time and I would just nock one out and send it but then I started seeing it as a challenge. The one I am doing is 58" long.
Logged

Offline PEARL DRUMS

  • Member
  • Posts: 14,079
  • }}}--CK-->
Re: 12# bow
« Reply #4 on: February 12, 2018, 01:08:50 pm »
It seems a softer wood that requires more wood to make a bow might be the best bet. Like elm, hackberry or maple. I think any of the "better " bow woods would be a toothpick by the time you got done.
Logged
Only when the last tree has died and the last river has been poisoned and the last fish has been caught will we realize we cannot eat money.

Offline DC

  • Member
  • Posts: 10,396
Re: 12# bow
« Reply #5 on: February 12, 2018, 01:29:56 pm »
I made a Boo backed Yew for my grandson. It's 44" NTN and 10#@22". The limbs are 9/16" wide and 3/8" thick. You could pull it farther but it would take some set I think. he shoots 18" 280 grain(heavy tips) bamboo arrows. It is surprisingly snappy. With a longer draw length and lighter arrows I think it would work.
Logged

Offline Jim Davis

  • Member
  • Posts: 1,350
  • Reparrows
    • Reparrows
Re: 12# bow
« Reply #6 on: February 12, 2018, 02:27:01 pm »
Must be an unusual case where a bow drawn  26 inches is wanted at only 12#.

The kids bows I have made have had draw lengths of18 to 22 and have launched their light arrows with authority. The are small, but are not toys. The bows have been 48-56 inches long.

The 1/4" shafts I make for them weigh about 100 g at 20" long (This is without points, which add very little, as they are pressed steel.)

Is that 200 g arrow going 160 fps out of a 12# bow a typo or are you not the real Badger?
« Last Edit: February 12, 2018, 02:32:16 pm by Jim Davis »
Logged
Jim Davis

Kentucky--formerly Maine

Offline willie

  • Member
  • Posts: 3,228
Re: 12# bow
« Reply #7 on: February 12, 2018, 02:35:41 pm »
made one for my grandson about like that weight. 1/4" dowels are way too stiff, and if I put much weight on the tips, are too heavy to be useful.


I do see 3' bamboo skewers on amazon I might order.   5mm dia
Logged

Offline Badger

  • Member
  • Posts: 8,124
Re: 12# bow
« Reply #8 on: February 12, 2018, 02:40:21 pm »
Quote from: Jim Davis on February 12, 2018, 02:27:01 pm
Must be an unusual case where a bow drawn  26 inches is wanted at only 12#.

The kids bows I have made have had draw lengths of18 to 22 and have launched their light arrows with authority. The are small, but are not toys. The bows have been 48-56 inches long.

The 1/4" shafts I make for them weigh about 100 g at 20" long (This is without points, which add very little, as they are pressed steel.)

Is that 200 g arrow going 160 fps out of a 12# bow a typo or are you not the real Badger?

  Jim, I have no idea if it will do it or not, I am just shooting for it. Going to go with a very radical design.
Logged

Offline Badger

  • Member
  • Posts: 8,124
Re: 12# bow
« Reply #9 on: February 12, 2018, 02:42:19 pm »
   I am actually going to do it in two stages, I have the bow laid up now with about 4" recurves. Going to finish it here and if still doggy going to add the reflex and take the weight back down.
Logged

Offline Jim Davis

  • Member
  • Posts: 1,350
  • Reparrows
    • Reparrows
Re: 12# bow
« Reply #10 on: February 12, 2018, 05:40:16 pm »
Quote from: willie on February 12, 2018, 02:35:41 pm
made one for my grandson about like that weight. 1/4" dowels are way too stiff, and if I put much weight on the tips, are too heavy to be useful.


I do see 3' bamboo skewers on amazon I might order.   5mm dia

I make 1/4" shafts from spruce. Pretty light and spine close to what is wanted. Only drawback is they break much easier than hardwood.
Logged
Jim Davis

Kentucky--formerly Maine

Offline Badger

  • Member
  • Posts: 8,124
Re: 12# bow
« Reply #11 on: February 12, 2018, 08:55:53 pm »
  I might make some purple heart 3/16 tapered shafts. I think skinny and dense with small fletches might carry better. I don't think I need much spine.
Logged
Pages: [1]
« previous next »