Main Discussion Area > Flight Bows

Bare shafting flight arrows

<< < (7/7)

Badger:
  Allen, I bought it in the clear doug fir section which is supposed to be kiln dried but I am doubting the dryness.

Selfbowman:

--- Quote from: avcase on February 23, 2018, 06:58:36 pm ---Steve,
It seems like you have an exceptional board there!  If you get a chance, can you create a straight dowel from it and do a spine/deflection test on it?  If it is truly exceptional in stiffness, then it has the potential to add much more distance to your shots as arrows rather than a bow.

Alan

--- End quote ---

Alan I was joking but it would be cool to make arrows and  a bow from the same piece of wood.

avcase:

Alan I was joking but it would be cool to make arrows and  a bow from the same piece of wood.
[/quote]

That would be funny!

Steve,
There is always the option to set the oven to 375 and bake a few few pieces for 15-20 minutes. May need to bind the blanks to something straight to keep them from curling up.

Navigation

[0] Message Index

[*] Previous page