Main Discussion Area > Flight Bows
Bare shafting flight arrows
Selfbowman:
--- Quote from: DC on February 12, 2018, 01:56:37 pm ---350 is a long way down the road for me. I've only tried once and the best I got was just under 200 depending on the measuring method. That was with about 10 GPP and a 38# bow.
[/quote
I think that's a pretty good distance with that set up. Arvin
--- End quote ---
Badger:
I found a 6ft 2x2 doug fir at lowes today. It has straight grain and a specific gravity of close to 80, heads and shoulders denser than any doug fir I have ever worked with. Can't wait to get it cut up and make some arrows. I hope it doesn't let me down. I think I can get about 32 arrows if I don't screw up
Selfbowman:
Steve I ordered a dozen 11-32 shafts spine at 100 . And a dozen at 75-80 spine yesterday. I am thinking I can get them pretty thin on the ends .also dug furr. Wt. 450 gr. Arvin
Selfbowman:
Heck Steve build a bow out of that board. Arvin
Badger:
Arvin, the grain is so straight I am thinking about it. Same density as most osage but a whole lot stiffer
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version