« previous next »
Pages: [1]

Author Topic: First Successful Build- Final product  (Read 913 times)

0 Members and 1 Guest are viewing this topic.

Offline AniKituahBowyer

  • Member
  • Posts: 21
First Successful Build- Final product
« on: January 14, 2018, 07:10:13 am »
Here's the finished product, folks. Same dimensions, but the draw weight is now exactly #40 @28". The inlaying of the crow feathers with Tite bond III and lacquer added the 4 lbs needed to hit the #40 mark!

I named it Seattle because of all the crows here, and the fact that all the glue and lacquer cloud up when the bow gets cold. It actually creates a pretty cool effect, IMHO. Thanks for all the comments and suggestions in refining this one. I'll be looking to folks for suggestions again on my next build.   (SH) :BB

Happy hunting, y'all!
Logged

Offline Philipp A

  • Member
  • Posts: 302
Re: First Successful Build- Final product
« Reply #1 on: January 14, 2018, 08:22:03 am »
Cool looking finish! I like it. From the strung bow it looks like the tiller managed to come out great as well. Great first bow, I am sure you it will not be your last one!
Logged

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,609
Re: First Successful Build- Final product
« Reply #2 on: January 14, 2018, 11:44:12 am »
How about a full draw pic.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC
Pages: [1]
« previous next »