Author Topic: Steaming wood questions!  (Read 4007 times)

0 Members and 1 Guest are viewing this topic.

Offline JW_Halverson

  • Member
  • Posts: 11,923
Re: Steaming wood questions!
« Reply #15 on: January 02, 2018, 06:12:12 pm »
I have seen shipwrights bending 2x8 oak planking in 24 ft pieces!  Takes a mighty big boiler to steam wood like that.
Guns have triggers. Bicycles have wheels. Trees and bows have wooden limbs.

Offline Hawkdancer

  • Member
  • Posts: 5,040
Re: Steaming wood questions!
« Reply #16 on: January 02, 2018, 08:55:36 pm »
You're right there!  If I remember correctly, Rollin has a water return built into his system to keep the steam recycling!  His Boiler is a milk can, I think.
Hawkdancer
Life is far too serious to be taken that way!
Jerry

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: Steaming wood questions!
« Reply #17 on: January 03, 2018, 10:45:21 am »
I watch a show on PBS NOVA where they were building Roman Chariots. They were bending tremendous oak planks. I thank they steamed them for 6 to 8 hours or more then bent them the way they wanted.
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC