Author Topic: Does anyone use a froe and a brake for splitting staves?  (Read 1757 times)

0 Members and 1 Guest are viewing this topic.

Offline Strichev

  • Member
  • Posts: 172
Does anyone use a froe and a brake for splitting staves?
« on: October 01, 2017, 11:28:13 am »
In the past I was tremendously disappointed by the way a nice straight ash log split into many useful (and as many useless) staves when I used wedges to split it. That's why I decided to use a froe this time - and it seems to work wonders. No more runoffs as one can split the wood in a very controlled manner, well, at least compared to the aforementioned wedge method.

Anyway, I've been wondering whether anyone else uses a froe plus brake and if so, is there is some advice or a nifty trick to make the whole thing even better?

Offline BowEd

  • Member
  • Posts: 9,390
  • BowEd
Re: Does anyone use a froe and a brake for splitting staves?
« Reply #1 on: October 01, 2017, 11:36:00 am »
I think most of the trick is reading the longitudal grain correctly before splitting,but you may have something there using a froe.Good idea.
BowEd
You got to stand for something or you'll fall for anything.
Ed

Offline osage outlaw

  • Member
  • Posts: 11,962
Re: Does anyone use a froe and a brake for splitting staves?
« Reply #2 on: October 01, 2017, 11:41:38 am »
A froe won't work on the logs that I split. 
I started out with nothin' and I still got most of it left

Offline Strichev

  • Member
  • Posts: 172
Re: Does anyone use a froe and a brake for splitting staves?
« Reply #3 on: October 01, 2017, 11:46:09 am »
A froe won't work on the logs that I split.

Why not?  :) I guess the logs need to be at least somewhat straight for the froe to work, that's true.

Offline osage outlaw

  • Member
  • Posts: 11,962
Re: Does anyone use a froe and a brake for splitting staves?
« Reply #4 on: October 01, 2017, 12:28:39 pm »
Because I split osage logs up to 24" diameter.  I use a lot of steel wedges.  It might work good on straight grained white woods but I don't split many of those. 
I started out with nothin' and I still got most of it left

Offline willie

  • Member
  • Posts: 3,228
Re: Does anyone use a froe and a brake for splitting staves?
« Reply #5 on: October 01, 2017, 01:29:33 pm »
Quote
Because I split osage logs up to 24" diameter.

I guess if you had a brake that could handle the stress of trying to bend a the log, you could direct the split.
two stumps and a comealong or winch?    Yarding a longer log to the brake would help.

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,609
Re: Does anyone use a froe and a brake for splitting staves?
« Reply #6 on: October 01, 2017, 01:38:29 pm »
I have a froe I use occasionally for difficult staves that need reducing. It makes it easy to control the the direction of the split sometimes.
« Last Edit: October 01, 2017, 10:20:28 pm by Pat B »
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline Badger

  • Member
  • Posts: 8,124
Re: Does anyone use a froe and a brake for splitting staves?
« Reply #7 on: October 01, 2017, 01:51:53 pm »
  I have assisted guys with splitting that were using a froe, it did seem to work well.

Offline Primortall

  • Member
  • Posts: 2
    • Iheartguys
Re: Does anyone use a froe and a brake for splitting staves?
« Reply #8 on: October 01, 2017, 05:12:58 pm »
Yep. Used froe on a few logs and it worked pretty well. I haven't ran into one that didn't work well with it yet, but also have a small sample size.

Offline Hamish

  • Member
  • Posts: 1,549
Re: Does anyone use a froe and a brake for splitting staves?
« Reply #9 on: October 01, 2017, 09:46:57 pm »
 I have used a froe, it can work well depending on the wood, and how straight, and how dry it is. I don't use it often enough and often forget which side you are supposed to stress to redirect the split. I end up using wedges most of the time to break a log down.