« previous next »
Pages: [1]

Author Topic: Question on brace height and string tension compromise  (Read 887 times)

0 Members and 1 Guest are viewing this topic.

Offline sleek

  • Member
  • Posts: 6,764
Question on brace height and string tension compromise
« on: September 19, 2017, 06:37:31 pm »
If you get a higher string tension at 9 inches of brace than you do at 6, does it make up for the lost 3 inches of draw?
Logged
Tread softly and carry a bent stick.

Dont seek your happiness through the approval of others

Offline SLIMBOB

  • Member
  • Posts: 3,759
  • Deplorable Slim
Re: Question on brace height and string tension compromise
« Reply #1 on: September 19, 2017, 07:13:19 pm »
Good question.. I'm guessing no, but I will be curious what the numbers are.
Logged
Liberty, In God We Trust, E Pluribus Unum.  Distinctly American Values.

Offline DC

  • Member
  • Posts: 10,396
Re: Question on brace height and string tension compromise
« Reply #2 on: September 19, 2017, 07:23:57 pm »
I once made up a string with a scale in it just to test the string tension. The highest tension is a low brace. I was testing with a 40# bow. At about 6" brace height the string tension was about 45#. (It was a while ago so the numbers are sorta guesses) As you drew the bow the string tension dropped. It was weird, the harder I pulled the lower the string tension was. I can't remember if it ever got down to 40#. Try it.
Logged
Pages: [1]
« previous next »