« previous next »
Pages: 1 ... 4 5 [6] 7 8

Author Topic: Trade blanket bow build  (Read 22038 times)

0 Members and 6 Guests are viewing this topic.

Offline lebhuntfish

  • Member
  • Posts: 3,823
  • If the wood will bend, I'll make it beautiful!
Re: Trade blanket bow build
« Reply #75 on: August 25, 2017, 09:45:10 am »
Ok cool,  just wondering.  I talked to a kid at OJAM a couple of years ago that hadn't taken the scales off before he tried to put the finish on.  It was a little challenging to help him get them off.

Patrick
Logged
Once an Eagle Scout, always an Eagle Scout!

Missouri, where all the best wood is! Well maybe not the straightest!

Building a bow has been the most rewarding, peaceful, and frustrating things I have ever made with my own two hands!

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,611
Re: Trade blanket bow build
« Reply #76 on: August 25, 2017, 10:26:06 am »
Patrick, you can use duct tape like a lint remover to eliminate lots of the scales then, like Clint, use fingers or finger nails to scrape the rest off.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline ---GUTSHOT--->

  • Member
  • Posts: 1,310
Re: Trade blanket bow build
« Reply #77 on: August 25, 2017, 10:41:20 am »
Your trade blanket bow is gonna be a nice one!
Logged

Offline Mad Max

  • Member
  • Posts: 480
Re: Trade blanket bow build
« Reply #78 on: August 25, 2017, 02:42:15 pm »
I got to use some tape next time I put skins on
Thanks Clint.
Logged
I would rather fail trying to do something above my means, Than to succeed at something beneath my means.

Offline lebhuntfish

  • Member
  • Posts: 3,823
  • If the wood will bend, I'll make it beautiful!
Re: Trade blanket bow build
« Reply #79 on: August 25, 2017, 05:53:42 pm »
Quote from: Pat B on August 25, 2017, 10:26:06 am
Patrick, you can use duct tape like a lint remover to eliminate lots of the scales then, like Clint, use fingers or finger nails to scrape the rest off.

Yeah Pat,  Ive done that several times.  JohnW showed me a trick at mojam a couple of years ago,  he uses steel wool.  It act works pretty slick. 
I was just wondering if Clint was going to show the process. 

Patrick
Logged
Once an Eagle Scout, always an Eagle Scout!

Missouri, where all the best wood is! Well maybe not the straightest!

Building a bow has been the most rewarding, peaceful, and frustrating things I have ever made with my own two hands!

Offline osage outlaw

  • Member
  • Posts: 11,962
Re: Trade blanket bow build
« Reply #80 on: August 25, 2017, 09:21:57 pm »
I've used tape before.  I've also used an air compressor to blow them off.  Now I just use a slightly sweaty thumb.  Simple but effective. 

While I'm waiting on the bow to lose the moisture from the skins I started on another bow blank I had in the corner.  This one is shorter with recurved tips.  I've got a new bow in mind for myself. 




Logged
I started out with nothin' and I still got most of it left

Offline upstatenybowyer

  • Member
  • Posts: 2,700
Re: Trade blanket bow build
« Reply #81 on: August 25, 2017, 11:00:20 pm »
You're on a roll man! Keep it going  :OK

 (-P
Logged
"Even as the archer loves the arrow that flies, so too he loves the bow that remains constant in his hands."

Nigerian Proverb

Offline Aaron H

  • Member
  • Posts: 3,437
Re: Trade blanket bow build
« Reply #82 on: August 26, 2017, 08:01:04 am »
Sweet profile Clintster
Logged

Offline bjrogg

  • Member
  • Posts: 10,987
  • Cedar Pond
Re: Trade blanket bow build
« Reply #83 on: August 26, 2017, 11:43:40 am »
Gotta agree with Aaron, that profile looks pretty wicked.
Bjrogg
Logged
A hot cup of coffee and a beautiful sunrise

Offline osage outlaw

  • Member
  • Posts: 11,962
Re: Trade blanket bow build
« Reply #84 on: August 27, 2017, 07:30:11 pm »
The bow has been sanded to 600 grit.  That's probably a little overkill but I had the sandpaper and the time.  I make sure the fade transitions are smooth.  It bugs me when they have the chatter marks on the rings from a scraper.   I'll give it a few more days to dry before I seal it.

Logged
I started out with nothin' and I still got most of it left

Offline selfbow joe

  • Member
  • Posts: 996
  • 1-812-344-1590
Re: Trade blanket bow build
« Reply #85 on: August 27, 2017, 08:55:44 pm »
Looking good Clint. Can't wait to see it in person and see it shoot.
Logged

Offline bjrogg

  • Member
  • Posts: 10,987
  • Cedar Pond
Re: Trade blanket bow build
« Reply #86 on: August 27, 2017, 09:06:39 pm »
Looks good Clint, sometimes it's kinda nice to feel a new bow between your fingers while your doing that finishing sanding and admire its unbraced curves.
Bjrogg
Logged
A hot cup of coffee and a beautiful sunrise

Offline osage outlaw

  • Member
  • Posts: 11,962
Re: Trade blanket bow build
« Reply #87 on: August 27, 2017, 09:42:35 pm »
You are spending too much time on the tractor BJ   ;D
Logged
I started out with nothin' and I still got most of it left

Offline bjrogg

  • Member
  • Posts: 10,987
  • Cedar Pond
Re: Trade blanket bow build
« Reply #88 on: August 28, 2017, 05:44:36 am »
Quote from: osage outlaw on August 27, 2017, 09:42:35 pm
You are spending too much time on the tractor BJ   ;D
You could have a point there Clint, but I just love the feel of a bow I just finished sanding.
Bjrogg
Logged
A hot cup of coffee and a beautiful sunrise

Offline Onebowonder

  • Member
  • Posts: 1,495
Re: Trade blanket bow build
« Reply #89 on: August 28, 2017, 10:53:01 am »
Quote from: bjrogg on August 28, 2017, 05:44:36 am
Quote from: osage outlaw on August 27, 2017, 09:42:35 pm
You are spending too much time on the tractor BJ   ;D
You could have a point there Clint, but I just love the feel of a bow I just finished sanding.
Bjrogg

Nothing should come between a man and his bow. ...unless it's his arm guard!  - OneBow
Logged
Pages: 1 ... 4 5 [6] 7 8
« previous next »