« previous next »
Pages: 1 ... 3 4 [5] 6 7 8

Author Topic: Trade blanket bow build  (Read 22037 times)

0 Members and 5 Guests are viewing this topic.

Offline osage outlaw

  • Member
  • Posts: 11,962
Re: Trade blanket bow build
« Reply #60 on: August 21, 2017, 10:41:33 am »
Thanks guys.   I'm prepping for the skins.  I did some smoothing and sanding on the bow.  I like to tape the bow off to keep excess glue from getting on it.  I hate sanding. 




I put the tape just about 1/16" down from the back.






I put a thin sizing coat of TB2 down to help seal the bow so the moisture from the skin doesn't soak in very much.  I'll put the skins on after lunch.

Logged
I started out with nothin' and I still got most of it left

Offline osage outlaw

  • Member
  • Posts: 11,962
Re: Trade blanket bow build
« Reply #61 on: August 21, 2017, 01:17:02 pm »
I'm using a nice set of WDB skins from Cipriano. 




I soaked them in water for about 5 minutes to soften up.  Then I hung them up to let the water drip off.  I mix a few drops of water in with the TB glue and spread it all over the back of one limb.  I lay the skin down, center the pattern, and then work all of the air bubbles out from under neath it.  The sides started to wrinkle up so I wrapped it loosely with some string.  Every 5 minutes or so I roll the string just a little so it doesn't leave impressions in the skin.  I put it in front of a fan to help dry it. 






After about 20 minutes its dry enough to take the string off.



Logged
I started out with nothin' and I still got most of it left

Offline selfbow joe

  • Member
  • Posts: 996
  • 1-812-344-1590
Re: Trade blanket bow build
« Reply #62 on: August 21, 2017, 06:45:37 pm »
Those skins looks good. The handle looks awesome.
Logged

Offline upstatenybowyer

  • Member
  • Posts: 2,700
Re: Trade blanket bow build
« Reply #63 on: August 21, 2017, 07:33:18 pm »
Very cool to see how you do the skins.  8)

 (-P
Logged
"Even as the archer loves the arrow that flies, so too he loves the bow that remains constant in his hands."

Nigerian Proverb

Offline bentstick54

  • Member
  • Posts: 769
Re: Trade blanket bow build
« Reply #64 on: August 21, 2017, 08:25:33 pm »
Good looking bow Clint.
Logged

Offline BowEd

  • Member
  • Posts: 9,390
  • BowEd
Re: Trade blanket bow build
« Reply #65 on: August 21, 2017, 09:03:45 pm »
Gotta love those coon tails!!!
Logged
BowEd
You got to stand for something or you'll fall for anything.
Ed

Offline osage outlaw

  • Member
  • Posts: 11,962
Re: Trade blanket bow build
« Reply #66 on: August 21, 2017, 09:10:11 pm »
Thanks guys.  You have to be careful wrapping the string around it like that.  If it's to tight it will leave indentions on the back.  I wanted to clean up the edges this evening but decided it needed more time to dry.  I'll get back on it Thursday. 
Logged
I started out with nothin' and I still got most of it left

Offline bubby

  • Member
  • Posts: 11,054
Re: Trade blanket bow build
« Reply #67 on: August 21, 2017, 09:19:36 pm »
Looking good
Logged
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

Offline Stick Bender

  • Member
  • Posts: 2,003
Re: Trade blanket bow build
« Reply #68 on: August 22, 2017, 02:34:28 pm »
 Sweet !
Logged
If you fear failure you will never Try !

Offline osage outlaw

  • Member
  • Posts: 11,962
Re: Trade blanket bow build
« Reply #69 on: August 24, 2017, 03:34:20 pm »
Thanks.

I cleaned up the skins today.  I use a very fine file to cut through the skin. 




Here is where the tape pays off.  When I remove it there is just a thin strip of glue to clean up. 






I use a razor blade as a tiny scraper to clean it up.  It took just a few minutes to get it all cleaned up.  The bow is ready for sanding now.




The skins aren't an exact color match but they look good enough for me.

Logged
I started out with nothin' and I still got most of it left

Offline stickbowbeard

  • Member
  • Posts: 49
Re: Trade blanket bow build
« Reply #70 on: August 24, 2017, 04:01:18 pm »
Great looking bow.  This build-along is helping me with some inspiration.  Thanks for sharing!
Logged

Offline Little John

  • Member
  • Posts: 1,709
Re: Trade blanket bow build
« Reply #71 on: August 24, 2017, 06:55:39 pm »
Nice job!!!
Logged
May all of your moments afield with bow in hand please and satisfy you.            G. Fred Asbell

Offline Knoll

  • Member
  • Posts: 3,016
  • Mikey
Re: Trade blanket bow build
« Reply #72 on: August 24, 2017, 08:44:56 pm »
Useful follow along, Mr Clint. Thanks for taking the time!
Logged
... alone in distant woods or fields, in unpretending sproutlands or pastures tracked by rabbits, even in a bleak and, to most, cheerless day .... .  I suppose that this value, in my case, is equivalent to what others get by churchgoing & prayer.  Hank Thoreau, 1857

Offline lebhuntfish

  • Member
  • Posts: 3,823
  • If the wood will bend, I'll make it beautiful!
Re: Trade blanket bow build
« Reply #73 on: August 24, 2017, 11:18:48 pm »
Very good build along Clint! The mods should make this a sticky.  It would be great refrence for all of the new people wanting to build a bow. 
Are you going to show the finishing and scale removal as well?

Patrick
Logged
Once an Eagle Scout, always an Eagle Scout!

Missouri, where all the best wood is! Well maybe not the straightest!

Building a bow has been the most rewarding, peaceful, and frustrating things I have ever made with my own two hands!

Offline osage outlaw

  • Member
  • Posts: 11,962
Re: Trade blanket bow build
« Reply #74 on: August 25, 2017, 09:12:59 am »
Thanks guys.

Patrick, I already removed the scales.  I just use my fingers to push the scales off.  They came off very easily on this skin.
Logged
I started out with nothin' and I still got most of it left
Pages: 1 ... 3 4 [5] 6 7 8
« previous next »