Author Topic: Always like the first time  (Read 4489 times)

0 Members and 1 Guest are viewing this topic.

Offline Marc St Louis

  • Administrator
  • Member
  • Posts: 7,877
  • Keep it flexible
    • Marc's Bows and Arrows
Re: Always like the first time
« Reply #15 on: July 14, 2017, 08:23:19 am »
When I am that close to finish then all I use is sandpaper, unless it's grossly overweight.  Then it's some light scraping and then sandpaper.
Home of heat-treating, Corbeil, On.  Canada

Marc@Ironwoodbowyer.com

Offline mullet

  • Global Moderator
  • Member
  • Posts: 22,909
  • Eddie Parker
Re: Always like the first time
« Reply #16 on: July 14, 2017, 10:03:25 am »
I do the same as Marc. I'll work it down with a Palm sander or the outside edge with scraper.
Lakeland, Florida
 If you have to pull the trigger, is it really archery?

Offline bjrogg

  • Member
  • Posts: 10,987
  • Cedar Pond
Re: Always like the first time
« Reply #17 on: July 14, 2017, 01:13:51 pm »
I usually can't resist short drawing it and flinging some arrows through to see how it feels. Then like Marc sand paper and light scrapping if needed. Round edges and smooth everything out.
Bjrogg
A hot cup of coffee and a beautiful sunrise

Offline George Tsoukalas

  • Member
  • Posts: 9,425
    • Traditional and Primitive Archers
Re: Always like the first time
« Reply #18 on: July 14, 2017, 04:32:46 pm »
Yes, indeed, steve. We must take out time. :)
Once I string the stave for the first time I only use a scraper-like tool.
When I hit full draw it's time to celelbrate!
Jawge
« Last Edit: July 14, 2017, 04:36:41 pm by George Tsoukalas »
Set Happens!
If you ain't breakin' you ain't makin!

Offline sleek

  • Member
  • Posts: 6,741
Re: Always like the first time
« Reply #19 on: July 14, 2017, 09:48:44 pm »
I try to get a real good even floor tiller, then brace it. Once braced i will nit draw it until brave profile is exact and perfect. Then I draw it usually without any tiller problems, and work it down to weight by scraping with my KaBar. Thise last few inches can be a pain. Especially when you take shavings off and weight doesnt drop.
Tread softly and carry a bent stick.

Dont seek your happiness through the approval of others

Offline Stick Bender

  • Member
  • Posts: 2,003
Re: Always like the first time
« Reply #20 on: July 15, 2017, 07:55:57 am »
That's always challenging because your at the point of no return lately I have been attempting to get my bows to tiller early & side tiller to final draw not always suscesfull  but don't like removing belly wood when every thing is right !
If you fear failure you will never Try !

Offline Badger

  • Member
  • Posts: 8,124
Re: Always like the first time
« Reply #21 on: July 15, 2017, 12:07:28 pm »
      I was actually talking more about the feeling you get when you are creeping up on a near perfect finish.The excitement you feel is possibly more intense that the first bow you ever built. I think as you gain experience your expectations get higher and that's what keeps the intensity up.

Offline DC

  • Member
  • Posts: 10,396
Re: Always like the first time
« Reply #22 on: July 15, 2017, 01:05:05 pm »
I'll let you know in 10 or 15 years when I sneak up on my first "perfect" finish ;D ;D ;D

Offline H Rhodes

  • Member
  • Posts: 2,172
Re: Always like the first time
« Reply #23 on: July 15, 2017, 03:00:10 pm »
Me too DC.  It is awesome that someone who has made as many bows as Steve has still gets his tuning fork ringing from tillering a bow!!  It's powerful stuff.  Enough internet - heading to the shop.  I got a bow to work on...
Howard
Gautier, Mississippi

Offline George Tsoukalas

  • Member
  • Posts: 9,425
    • Traditional and Primitive Archers
Re: Always like the first time
« Reply #24 on: July 15, 2017, 03:27:49 pm »
No, Steve, I keep all  feelings under control until full draw. Then I celebrate. Jawge
Set Happens!
If you ain't breakin' you ain't makin!