« previous next »
Pages: [1]

Author Topic: Birch bark  (Read 2019 times)

0 Members and 1 Guest are viewing this topic.

Offline DC

  • Member
  • Posts: 10,396
Birch bark
« on: June 20, 2017, 02:22:02 pm »
I happened upon a guy that had removed a Birch tree so I grabbed one of the best pieces. Birch doesn't grow here except for ornamentals so It's a bit of a find :D :D. I got the bark off. It's 33.5"x12". Is there any special treatment it needs? It's been down for a month or so.
Logged

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: Birch bark
« Reply #1 on: June 20, 2017, 02:25:03 pm »
You can let it dry or go ahead and use it however you planned to use it.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline DC

  • Member
  • Posts: 10,396
Re: Birch bark
« Reply #2 on: June 20, 2017, 02:37:46 pm »
I'm planning to back the bow I just sinewed so I'll let them both dry.
Thanks
Logged

Offline simson

  • Member
  • Posts: 2,310
  • stonehill-primitive-bows
    • stonehill-primitive-bows
Re: Birch bark
« Reply #3 on: June 20, 2017, 02:57:25 pm »
Birch bark has layers. the outer is most violated and not usable
 the inner layers thin as possible is the best backing.
Logged
Simon
Bavaria, Germany

Offline DC

  • Member
  • Posts: 10,396
Re: Birch bark
« Reply #4 on: June 20, 2017, 03:04:35 pm »
Can you get away with using one layer? They are only .002-.003" thick.
Logged

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: Birch bark
« Reply #5 on: June 20, 2017, 03:58:01 pm »
It's only decorative so one, maybe 2 layers should be OK.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline PatM

  • Member
  • Posts: 6,737
Re: Birch bark
« Reply #6 on: June 20, 2017, 04:09:00 pm »
PM me your address. I can send you some better stuff for sinew covering.
Logged
Pages: [1]
« previous next »