« previous next »
Pages: 1 2 3 [4] 5

Author Topic: Sinewed bow  (Read 11836 times)

0 Members and 1 Guest are viewing this topic.

Offline DC

  • Member
  • Posts: 10,396
Re: Sinewed bow
« Reply #45 on: July 16, 2017, 04:33:00 pm »
OK the month is up(well two days short) so I braced it and started pulling a bit but now the string alignment is out. It was good to 20" before I sinewed, now the string comes off at 18" and the bow hops all over the shop. I'm guessing heat is out so how can I get it back into alignment?
Logged

Offline bradsmith2010

  • Member
  • Posts: 5,187
Re: Sinewed bow
« Reply #46 on: July 16, 2017, 04:39:39 pm »
could we see a picture (-P
Logged

Offline DC

  • Member
  • Posts: 10,396
Re: Sinewed bow
« Reply #47 on: July 16, 2017, 05:01:37 pm »
Here's a few. Any more? Of what part of the bow? From what angle?
Logged

Offline PatM

  • Member
  • Posts: 6,737
Re: Sinewed bow
« Reply #48 on: July 16, 2017, 06:37:15 pm »
Manually torque it into line. You need to train it into line as you work the draw back. Install some deeply grooved bridges to hold the string centred while you do this.
Logged

Offline DC

  • Member
  • Posts: 10,396
Re: Sinewed bow
« Reply #49 on: July 16, 2017, 08:18:26 pm »
Once i get it in line will regular use of the bow keep it that way. It seems to me that the pulling would tend to line everything up.I have a habit of bring wrong though. ;D
Logged

Offline PatM

  • Member
  • Posts: 6,737
Re: Sinewed bow
« Reply #50 on: July 16, 2017, 08:28:27 pm »
It should. I have a few bows that have sat for a couple of years and they needed re-training since they drifted back a bit. Regular use promotes straightness.
Logged

Offline DC

  • Member
  • Posts: 10,396
Re: Sinewed bow
« Reply #51 on: July 17, 2017, 01:31:22 pm »
I'm getting it closer I think but every once in a while the string comes off. When you torque it do you twist it hard over and leave it for an hour or so or is it a little more subtle than that. I'm out to about 22" now. I've put bridges on but I wasn't sure where they should be so they are a little inboard of where the string leaves the bow at brace height.
Logged

Offline bradsmith2010

  • Member
  • Posts: 5,187
Re: Sinewed bow
« Reply #52 on: July 17, 2017, 01:41:50 pm »
thats looking great
Logged

Offline DC

  • Member
  • Posts: 10,396
Re: Sinewed bow
« Reply #53 on: July 17, 2017, 01:47:27 pm »
Thanks, but it's going to be unusable if the string won't stay on :D
Logged

Offline PatM

  • Member
  • Posts: 6,737
Re: Sinewed bow
« Reply #54 on: July 17, 2017, 02:40:44 pm »
 You have to be pretty bold and it's best to try to twist through the whole length of the bow rather than trying to just tweak it in one spot. I usually grip one recurve between my feet and torque the other end while(carefully) sighting down the length of the bow.

 Make sure the string isn't slipping and keep your head clear though.
Logged

Offline PEARL DRUMS

  • Member
  • Posts: 14,079
  • }}}--CK-->
Re: Sinewed bow
« Reply #55 on: July 17, 2017, 02:41:35 pm »
You might be surprised how little heat it takes to correct that and how well the sinew/glue will handle it. You have nothing to lose if the string wont stay on.
Logged
Only when the last tree has died and the last river has been poisoned and the last fish has been caught will we realize we cannot eat money.

Offline bradsmith2010

  • Member
  • Posts: 5,187
Re: Sinewed bow
« Reply #56 on: July 17, 2017, 02:44:37 pm »
put your fears aside and proceed with courage,, (W
Logged

Offline DC

  • Member
  • Posts: 10,396
Re: Sinewed bow
« Reply #57 on: July 17, 2017, 08:09:20 pm »
Best of 170 fps@10gpp. My fastest ever and I still have some weight to take off the recurves. It did register one of 312 fps but I think that was an error ;D ;D ;D
Logged

Offline DC

  • Member
  • Posts: 10,396
Re: Sinewed bow
« Reply #58 on: July 17, 2017, 09:31:12 pm »
Quote from: PatM on June 22, 2017, 09:49:17 pm
No man has ever done a successful sinew job and said that's it. ;)

175  ;D ;D ;D ;D ;D
Logged

Offline DC

  • Member
  • Posts: 10,396
Re: Sinewed bow
« Reply #59 on: July 18, 2017, 11:44:51 am »
I did about twenty or so shots when I was chronying it and it worked great. Then it threw the string >:( >:(. I pulled it to 27"(about) and the string barely lifts off. If I pike it a bit making the recurves shorter do you think that will reduce the tendency to twist and throw the string or should I just keep looking for that sweet spot.
Logged
Pages: 1 2 3 [4] 5
« previous next »