Author Topic: Working on tuning some shafts  (Read 6121 times)

0 Members and 2 Guests are viewing this topic.

Offline bjrogg

  • Member
  • Posts: 11,016
  • Cedar Pond
Working on tuning some shafts
« on: June 01, 2017, 07:43:54 am »
Been crazy busy since got back from Marshall, but late last night I mounted point and put self notch in this one. I trade with ksnow at Marshall. One of my stone point Red Osier hunting arrows and a nice obsidian point he picked out for about 30 store bought shafts he picked up that were spined to heavy for him. 1/2 dozen tapered shaft 67 lb spine 125 grain point 31 1/4" long. Bare shafted almost perfect first try.
Bjrogg
A hot cup of coffee and a beautiful sunrise

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: Working on tuning some shafts
« Reply #1 on: June 01, 2017, 07:52:54 am »
I'd say that one is shooting well.  :OK
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline bjrogg

  • Member
  • Posts: 11,016
  • Cedar Pond
Re: Working on tuning some shafts
« Reply #2 on: June 01, 2017, 09:00:00 am »
Thanks Pat, I thought they might work. That's pretty much exactly the same numbers that worked for my tappered shaft Red Osier Shoots. I'm thinking I might be able to tighten up my groups just a little bit with these shafts they look pretty nice. Thanks Kyle
Bjrogg
A hot cup of coffee and a beautiful sunrise

Offline ksnow

  • Member
  • Posts: 545
Re: Working on tuning some shafts
« Reply #3 on: June 01, 2017, 12:07:51 pm »
Glad to hear those shafts will work for you.  Maybe some day I will start shooting heavier bows.  Thank you for the beautiful arrow and point.  The wife has already laid claim to the point, it is destined for a display case.

Kyle

Offline bjrogg

  • Member
  • Posts: 11,016
  • Cedar Pond
Re: Working on tuning some shafts
« Reply #4 on: June 01, 2017, 01:19:16 pm »
That's great Kyle. I really gotta start working on organizing all my stuff. I did finally hang a bunch of my bows.
Bjrogg
A hot cup of coffee and a beautiful sunrise

Offline Trapper Rob

  • Member
  • Posts: 3,719
Re: Working on tuning some shafts
« Reply #5 on: June 04, 2017, 12:31:48 pm »
BJ looks like the center of that target has a little missing from it.

Offline bjrogg

  • Member
  • Posts: 11,016
  • Cedar Pond
Re: Working on tuning some shafts
« Reply #6 on: June 05, 2017, 06:43:25 pm »
Yea Rob and I've been picking at the corners for awhile now to. My son picked it up yesterday and said it was lighter than it use to be. Maybe get a new one for Fathers Day.
Bjrogg
A hot cup of coffee and a beautiful sunrise

Offline bjrogg

  • Member
  • Posts: 11,016
  • Cedar Pond
Re: Working on tuning some shafts
« Reply #7 on: June 06, 2017, 07:53:30 am »
Kyle, I like this one so much I ordered the ones I got from the benefit auction at Marshall to the same specs. I'm happy with our trade, hope you are to.
Bjrogg
A hot cup of coffee and a beautiful sunrise

Offline ksnow

  • Member
  • Posts: 545
Re: Working on tuning some shafts
« Reply #8 on: June 06, 2017, 10:06:07 pm »
That's great shooting with a very pretty arrow. I am very happy they worked well for you. I am planning to make a tobacco bag from the mink I got in the blanket trade, I'll post pics of the project.

Kyle

Offline bjrogg

  • Member
  • Posts: 11,016
  • Cedar Pond
Re: Working on tuning some shafts
« Reply #9 on: June 06, 2017, 10:24:37 pm »
Can't wait to see it Kyle.
Bjrogg
A hot cup of coffee and a beautiful sunrise

Offline bjrogg

  • Member
  • Posts: 11,016
  • Cedar Pond
Re: Working on tuning some shafts
« Reply #10 on: June 15, 2017, 10:59:15 am »
Got two done now, both shooting good.
Bjrogg
A hot cup of coffee and a beautiful sunrise

Offline ksnow

  • Member
  • Posts: 545
Re: Working on tuning some shafts
« Reply #11 on: June 15, 2017, 11:33:56 am »
That ought to do it for you.

Kyle

Offline Hawkdancer

  • Member
  • Posts: 5,040
Re: Working on tuning some shafts
« Reply #12 on: June 15, 2017, 12:03:40 pm »
Nice arrows and good shooting!
Hawkdancer
Life is far too serious to be taken that way!
Jerry

Offline bjrogg

  • Member
  • Posts: 11,016
  • Cedar Pond
Re: Working on tuning some shafts
« Reply #13 on: June 15, 2017, 02:46:35 pm »
Thanks Kyle
Thanks Hawkdancer, if I keep shooting like that it won't take long to wear that spot off my target to. Hopefully get a new one for Father's Day. The kids all noticed how worn out it is. I started in the center moved to top spot now working on the side and bottom.
Bjrogg
A hot cup of coffee and a beautiful sunrise

Offline jeffp51

  • Member
  • Posts: 1,641
Re: Working on tuning some shafts
« Reply #14 on: June 16, 2017, 10:11:06 am »
I scatter my shots at random. Helps my targets last longer