Author Topic: Grown limb splice  (Read 1301 times)

0 Members and 1 Guest are viewing this topic.

Offline sleek

  • Member
  • Posts: 6,743
Grown limb splice
« on: May 30, 2017, 10:52:41 pm »
Say you spot an osage tree with two nice billet limbs. Could a person cut one limb, cut a fish tail splice, and graft it to the other billet limb you did not cut, and wait a couple month for them to grow together before cutting and making a bow? If that works, you could grow spliced on siyahs, and for that mater, organically grow any bow you wish, including some neat mix match frankin bows.
Tread softly and carry a bent stick.

Dont seek your happiness through the approval of others

Offline Hamish

  • Member
  • Posts: 1,549
Re: Grown limb splice
« Reply #1 on: May 31, 2017, 12:47:06 am »
Sleek...are you smokin' crack again?

Offline jaxenro

  • Member
  • Posts: 247
Re: Grown limb splice
« Reply #2 on: May 31, 2017, 05:42:34 am »
I think it would be more than a couple of months but they do grafting like this with different types of Walnut to make gunstocks with, grafting on Claro Walnut to other types to help it grow. So I think it is theoretically possible but it might be a couple of years not months

Offline PatM

  • Member
  • Posts: 6,737
Re: Grown limb splice
« Reply #3 on: May 31, 2017, 06:45:38 am »
Grafts don't grow  together across the whole splice.

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,609
Re: Grown limb splice
« Reply #4 on: May 31, 2017, 08:29:13 am »
Only the cambium, the living portion of the tree(limb) grows together in a graft so when you remove the bark and cambium you'll still have to glue the splice together.
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC