Author Topic: Testing for the jug  (Read 4803 times)

0 Members and 1 Guest are viewing this topic.

Offline bjrogg

  • Member
  • Posts: 10,997
  • Cedar Pond
Testing for the jug
« on: April 24, 2017, 08:16:06 am »
Last year was my first year in the Primitive Archery world and I went to Marshall PA meet with all my hand made equipment. I learned a lot there and I think I made a few improvements. Last year my tappered shaft arrows had the fat end to the rear. They didn't pass through milk jugs and plugged the holes water tight. I shot a test arrow this morning. Pretty happy with results but was hard on my fletching
Bjrogg
A hot cup of coffee and a beautiful sunrise

Offline bjrogg

  • Member
  • Posts: 10,997
  • Cedar Pond
Re: Testing for the jug
« Reply #1 on: April 24, 2017, 08:21:49 am »
The fletching
Bjrogg
A hot cup of coffee and a beautiful sunrise

Offline bjrogg

  • Member
  • Posts: 10,997
  • Cedar Pond
Re: Testing for the jug
« Reply #2 on: April 24, 2017, 08:23:06 am »
I might have to spiral wrap them
Bjrogg
A hot cup of coffee and a beautiful sunrise

Offline Knoll

  • Member
  • Posts: 3,016
  • Mikey
Re: Testing for the jug
« Reply #3 on: April 24, 2017, 08:35:53 am »
If you're getting pass throughs, you'll be a man to beat!   (SH)

Good to see ya still have some of those "happy" arrows.
« Last Edit: April 24, 2017, 08:59:14 am by Knoll »
... alone in distant woods or fields, in unpretending sproutlands or pastures tracked by rabbits, even in a bleak and, to most, cheerless day .... .  I suppose that this value, in my case, is equivalent to what others get by churchgoing & prayer.  Hank Thoreau, 1857

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,617
Re: Testing for the jug
« Reply #4 on: April 24, 2017, 08:54:05 am »
With broadheads you would probably get a pass through with the thick end at the back but your arrows will fly better with the weight forward.
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline bjrogg

  • Member
  • Posts: 10,997
  • Cedar Pond
Re: Testing for the jug
« Reply #5 on: April 24, 2017, 09:06:26 am »
Thanks Knoll, I still gotta hit the jug.lol. but I think I can do that. My HHB bow "Sorry Peachie" is much faster than my rawhide backed ash bow I had last year to. Hope my shoulders can last the whole week.
Yup Pat pretty sure the broadhead she would pass through either way but not allowed for the jug shoot. I started out using forsythia which wasn't spined heavy enough to put fat end forward. Then when I made my first Red Osier shafts I made them the same. They are much nicer fat end forward, many advantages.
Bjrogg
« Last Edit: April 24, 2017, 02:21:20 pm by bjrogg »
A hot cup of coffee and a beautiful sunrise

Offline bjrogg

  • Member
  • Posts: 10,997
  • Cedar Pond
Re: Testing for the jug
« Reply #6 on: April 26, 2017, 07:29:11 am »
I'm 2 for 2 on the milk jugs. Blows right through them like nothing there. The juicy juice is a bit tougher. Had a hard time pulling them out.
Bjrogg
A hot cup of coffee and a beautiful sunrise

Offline osage outlaw

  • Member
  • Posts: 11,962
Re: Testing for the jug
« Reply #7 on: April 26, 2017, 07:33:47 am »
Looks good BJ.  I've missed the jug shoot every year.  I am going to try to participate this time.
I started out with nothin' and I still got most of it left

Offline bjrogg

  • Member
  • Posts: 10,997
  • Cedar Pond
Re: Testing for the jug
« Reply #8 on: April 26, 2017, 08:25:35 am »
Thanks Clint, looking forward to shooting with you. You know there's no metal drums allowed for the jug shoot right.lol. Man it's coming fast just a month away and I still don't have anything but trees planted. Sure hope when we get rolling everything comes up good. Not going to have the time or money to plant them over again
Bjrogg
A hot cup of coffee and a beautiful sunrise

Offline Buckeye Guy

  • Member
  • Posts: 3,033
Re: Testing for the jug
« Reply #9 on: April 26, 2017, 05:33:57 pm »
You are doing good
hope you win it this year
Guy Dasher
The Marshall Primitive Archery Rendezvous
Primitive Archery Society
Having  fun
To God be the glory !

Offline bjrogg

  • Member
  • Posts: 10,997
  • Cedar Pond
Re: Testing for the jug
« Reply #10 on: April 26, 2017, 09:35:39 pm »
Thanks Guy, I'll be happy just shooting with everyone and not doing anything to embarrassing. Should be fun though, can't wait to see everyone.
Bjrogg
A hot cup of coffee and a beautiful sunrise

Offline bubby

  • Member
  • Posts: 11,054
Re: Testing for the jug
« Reply #11 on: May 01, 2017, 03:52:10 pm »
Bj try cutting the fletching real short, like 1/8" to 3/8 on the backend. I think it will be easier on the feathwrs and still fly good, might need to make them longer though
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

Offline bjrogg

  • Member
  • Posts: 10,997
  • Cedar Pond
Re: Testing for the jug
« Reply #12 on: May 03, 2017, 06:20:00 pm »
I was thinking the same thing Bubby. I did fletch one like that, the rest I put a spiral wrap of sinew on. After inspection of the damaged fletching I could see I didn't scrap enough of the sealer off before glueing. I just use Elmers glue. I'm pretty happy with what I've got now. Red Osier tappered shafts, glue on 125 grain target points I got from Marshall last year. Wild turkey primaries hand cut, sinew wrapped fletching and self notch. Spine and weight matched. Hopefully I don't lose to many in the skunk cabbage or pond. Probably should make a few more.
Bjrogg
A hot cup of coffee and a beautiful sunrise

Offline bjrogg

  • Member
  • Posts: 10,997
  • Cedar Pond
Re: Testing for the jug
« Reply #13 on: May 03, 2017, 06:21:46 pm »
Another
A hot cup of coffee and a beautiful sunrise

Offline chamookman

  • Member
  • Posts: 3,021
Re: Testing for the jug
« Reply #14 on: May 04, 2017, 03:50:10 am »
Good lookin' Arrahs there BJ  :OK. Almost too pretty to use  (A) (SH) - Bob.
"May the Gods give Us the strength to draw the string to the cheek, the arrow to the barb and loose the flying shaft, so long as life may last." Saxon Pope - 1923.